Beskrivning
1. Produktbeskrivning
BMS Product feature:
About the battery BMS/PCB/PCM Function: Separate Version : separate port for charge/discharge We can customize any PCB from 1S to 35S lithium batteries with different current.
|
- Description of application effect
(Batterihanteringssystem) BMS can extend battery life and make battery work safely.
This model can be used for solar, LED lights, Emergency lights, Digital Equipment, etc.electric scooter,e-bike,tourisr
sightseeing vehicle,electric tricycle,low speed ev,emergrncy ups,solar street light,RV&home energy storage……
sightseeing vehicle,electric tricycle,low speed ev,emergrncy ups,solar street light,RV&home energy storage……
About your products,just tell us the relative voltage/cells/current A or equipment etc,we will help to recommend the most suitable products for you.
Mode | LWS-30S170A-308 (30S) |
PCM Size | L270*W115*T13.4 mm |
battery series | 4S-30S Available |
working current | 170A Available |
Ansökan | LED lights, Emergency lights, Digital Equipment, etc |
Prov | available |
Wiring:
1. First connect the B- of the BMS to the total negative pole of the battery pack;
3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
1. First connect the B- of the BMS to the total negative pole of the battery pack;
2.The cable starts from the thin black one connecting B-, the second red wire connects the positive pole of the first string of batteries, and the next string is connected in turn to positive pole of the battery,B-,B1,B2……B30; then insert the cable into the BMS;
(The maximum number of strings is 4-30 strings, the example picture is 30 strings) (Please weld the wires in order and avoid pseudo solder joints.)3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
PCM Specifications For 96V(30S) LiFePO4 Battery Packs | |||
Modell:LWS-30S170A-308(30S) | |||
Inga. | Test item | Criterion | |
1 | Spänning | Charging voltage | DC:109.5V CC/CV |
Balance voltage for single cell | 3.6±0.025V | ||
2 | Current | Balance current for single cell | 36±5mA |
Current consumption | ≤50μA | ||
Max continuous charging current | 30A | ||
Max continuous Discharging current | 170A | ||
3 | Over charge Protection | Over charge detection voltage for single cell | 3.75±0.025V |
Over charge detection delay time | 0.5S-1.5S | ||
Over charge release voltage for single cell | 3.55±0.05V | ||
4 | Over discharge protection | Over discharge detection voltage for single cell | 2.2±0.08V |
Over discharge detection delay time | 0.5S-1.5S | ||
Over discharge release voltage for single cell | 2.70±0.1V | ||
5 | Over current protection | Over current detection voltage | 0.1±0.025V |
Over current detection current | 400±50A | ||
Detection delay time | 50ms-200ms | ||
Release condition | Cut load,Automatic recovery | ||
6 | Short protection | Detection condition | Exterior short circuit |
Detection delay time | 100-600us | ||
Release condition | Cut load,Automatic recovery | ||
7 | Resistance | Protection circuitry(MOSFET) | ≤50mΩ |
8 | Temperatur | Operating Temperature Range | -40~+85ºC |
Storage Temperature Range | -40~+125ºC | ||
9 | Temperature protection | Charging temperature protection | 75±5ºC |
Discharging temperature protection | 75±5ºC |
3. FAQ
|