Beskrivning
Extrusion blow molding machine for 20liter 25liter 30liter 8gallon chemical barrel, including Parison Control B&R or MOOG, Servo Pump for saving power, servo robot, conveyor, leak tester, filling machine, capping machine, in-mould labeling or non-dry adhesive labeling machine for optional
| Unit | Punkt | Specifikation | Discription | Note |
| Product | Volym | Max. 30L | Double station, single die-head | |
| Extruding | Screw diameter | Φ100mm | Mixing model | |
| Screw L/D | 28:1 | |||
| Material of screw and barrel | 38CrMoALA | |||
| Plasticizing capacity | 200kg/h | Based on HDPE 5502, changed with material density | ||
| Extruding method | Gear box and strap | Invertors motor, hardness tooth surface gear box | ||
| Driving power | 75KW | |||
| Screw revolution | 10-100V/min | |||
| Heating zones | 3 | Temperature module, B&R | ||
| Heating power | 3φ5.5KW | |||
| Blowers | 3 | Power 120W | ||
| Cooling | Ja | Cooling water for feeding zone and gear box | ||
| Clamping unit | Strukturera |
Large arm and joint operation type, with large and average clamping force | ||
| Idle cycle time | 400*2 pc/h | |||
| Platen dimension | 680×660mm | W*H | ||
| Platen distance | 450~950mm | |||
| Clamping force | 300KN | |||
| Mold thickness scope | 455mm | |||
| Stroke | 880mm | |||
| Die head | Strukturera | Kontinuerlig | Central feeding | |
| Material | 38CrMoALA inner mirror | |||
| Die mouth | Φ80~Φ280 mm | |||
| Heating method | Stainless steel band | |||
| Heating zones | 5 | |||
| Die head blowing | Ja | |||
| Parison thickness controlling | Tillgängliga | B&R 100-point | ||
| Parison adjustment method | Outer mandrel | |||
| Adjustment | ±2mm | |||
| Blowing unit | Use top blowing device | |||
| Controlling system | Temperatur | Module | ||
| Programmer | B&R PLC | Austria | ||
| Human interface screen | B&R | Austria | ||
| Hydraulic | Oil motor power | 22KW | YUKEN, Japan | |
| Stämpla | YUKEN | Japan | ||
| Motion Control | Proportional | |||
| Direction control | REXROTH | Germany | ||
| Max. working pressure | 140 kg/cm2 | |||
| Pneumatics | Direction | FE STO | Germany | |
| Pressure controlling | Separate two adjusters for high and low pressure | |||
| Max. Tryck | 8kg/cm2,1m3/min | |||
| Other information | Lubricities method | Auto lubricate oil pump | ||
| Oil Pressure cooling | Oil Pressure cooling machine | |||
| Overall dimension | L * W * H | 7000*6800*3700mm | ||
| Vikt | TON | 15.0T |
The data are subject to further improvement without prior notice
