Beskrivning
CA6150 CA6250 Used Parallel Manual Metal Lathe Horizontal Tool
CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.
Product main technical specification:
| Specifikationer | CA6150 CA6150B CA6150C | CA6250 CA6250B CA6250C | |
| Max. Swing over bed | 500mm | ||
| Max. Swing over carriage | 300mm | ||
| Max. swing in gap | — | 720mm | |
| Effective gap length | — | 210mm | |
| Max. length of work piece | 750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm | ||
| Width of bed | 400mm | ||
| Section of turning tool | 25x25mm | ||
| Spindle | Spindle speeds | 10-1400rpm/16-1400rpm(24steps) | |
| Hole through spindle | 52mm. (80mm). [105mm] | ||
| Spindle taper | NO.6(MT6)(Φ90 1:20)[Φ113 1:20] | ||
| Feed | Number of feeds | 64(kinds)(for each) | |
| Range of metric threads(kinds) | (1-192mm)44kinds | ||
| Range of inch threads(kinds) | (2-24tpi)21kinds | ||
| Range of module threads(kinds) | 0.25-48(Moduie39kinds) | ||
| Range of pitch threads(kinds) | 1-96DP(37kinds) | ||
| Cross slide travel | 320mm | ||
| Top slide travel | 140mm | ||
| Tailstock | Max. tail stock spindle travel | 150mm | |
| Tail stock spindle diameter | 75mm | ||
| Taper of tail stock spindle center hole | NO.5(MT5) | ||
| Main motor | 7.5KW(10HP) | ||
| Packing dimensions (L*W*Hmm) | Overall dimensions for750mm | 2550x1140x1750 | |
| Overall dimensions for1000mm | 2700x1140x1750 | ||
| Overall dimensions for1500mm | 3200x1140x1750 | ||
| Overall dimensions for2000mm | 3700x1140x1750 | ||
| Overall dimensions for2200mm | 4030x1140x1750 | ||
| Overall dimensions for3000mm | 4850x1140x1750 | ||
| Overall dimensions for4000mm | 5800x1140x1750 | ||
| Vikt (kg) | Length | G.W N.W. | |
| Weight for 750mm | 2100 1990 | ||
| Weight for 1000mm | 2190 2070 | ||
| Weight for 1500mm | 2350 2220 | ||
| Weight for 2000mm | 2720 2570 | ||
| Weight for 2200mm | 2800 2600 | ||
| Weight for 3000mm | 3300 3200 | ||
| Weight for 4000mm | 3500 3400 | ||
Standard Accessories:
1. Centers;
2. Steady rest (750mm without this);
3. Follow rest (750mm without this);
4. Foot plate;
5. 3-jaw chuck;
6. Leading screw guard; (3000mm without this)
7. Toolpost protection;
8. Chuck protection;
9. Cooling system;
10. Work Lamp.
11. Back guard
Optional Accessories
1. Quick change toolpost
2. 2-axis Digital readout
3. 4-jaw chuck
4. Tamping attachment
packing shaping
For machine: usually by sea;
For documents: by international express, eg. DHL,TNT or EMS.
For packing :Free fumigation plywood packaging steel base
our service
1. Technical support online service provided.
2. Technical files service provided.
3. Machine operation video provided
4. On-site training service provided.
5.Spare parts replacement and repair service provided.
6 All of the questions will be replied within 8 timmar
7. If you need to develop products with your own specification, we can help you to work it out.
8. Always be honest, never lie to customer, and never declare anything we don’t have
Since 1996,20 år’ history for machine tool manufacturing
10 år’ history for export
Total 2 manufacturing bases in china
Sino-germany technology cooperation
Production of 8 categories, mer än 130 kinds of products
Set up design&research center at TAIWAN
Exported to total 48 countries in the world covered most areas
One-stop shopping for nearly all other types’ machine tools
1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What’s your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Borrmaskin ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .
3: Where is our factory located? Hur kan jag besöka där?
A : Our factory is located in Tengzhou City ,Shandong Province,277500 Kina. You are warmly welcomed to visit us.
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
5: What’s the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC at sight .
5: What’s the MOQ?
A: 1 uppsättning .(Only some low cost machines will be more than 1 uppsättning )
We want to know:
1.What’s your Industrial Voltage?
2.We strongly suggest you to tell us size, material of your workpiece for our evaluation, if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
3.If need CIF Price, please kindly tell us the port of destination.