Beskrivning
| Electric Parameter: | DC30V 15A, DC15V 30A; AC125V 28A, AC250V 18A 50Hz / 60Hz |
| Contact Life Cycles: | More than 10,000 cycles |
| Trip off Temperatures: | 60 ~ 180 degrees centigrade (increments of 5 degrees centigrade) |
| Temperature Tolerance: | +/-3 degrees centigrade, eller +/-5 degrees centigrade |
| Reset Temperature: | 10 ~ 45 degrees centigrade below the trip off temperature |
| Product Size Optional: | L23XW9.3XH6.4mm (same side terminals) / L29.1XW9.3XH6.4mm (Opposite side terminals) |
Produktbeskrivning
6AP series protector works as a sensitive power cut-out as 6AP and now also widely used in low voltage DC motors of automobile accessories, such as Car window lift motors, Front and rear wiper motors, Sun roof motors, Adjuster motors, Antenna lift motors, Door lock actuators, Sliding door motors, door-locks and various household electrical appliances. But compared with 6AP,6AP comes with a heating device which can double guarantee your protection, making it more reliable and safer if non-automatic reset motor protection is required.
Product Characteristics
* Miniature size for best installation flexibility
* Individually temperature calibrated and checked
* Positive make and break with snap action bimetal disc
* Repeatable temperature performance over life
* Thermal motor protection reacting precisely to both current and temperature
* Terminal material provides trouble-free welding and pre-treated for easy wave-soldering
* Gasket steel case suitable for many impregnation processes
* Current and temperature sensitivity for maximum design flexibility
* Wide selection of leads and imported Mylar insulating sleeves
* Same side or opposite side terminals
* Strict RoHS environmental standard implemented for each component
* Wide selection of trip off temperatures
* Custom configurations available: Electric current, spänning, open temperature, bimetal type, heater wire material, thickness
Product Applications
* Window lift motors
* Front and rear wiper motors
* Sun roof motors
* Adjuster motors
* Antenna lift motors
* Door lock actuators
* Sliding door motors
* Electric car seat
* Vacuum cleaners, Washing machines
* Heating devices
* Grinders, mixers, electrical tools
* Snow wipers and other garden equipments
Produktbeskrivning
17AMI thermal protector advantages:
• Miniature size.
• Individually temperature calibrated and checked.
• Positive make and break with Klixon snap action disc.
• Repeatable temperature performance over life.
• Gasket steel case suitable for many impregnation processes.
• Current and temperature sensitivity for maximum design flexibility.
• Wide selection of leads and insulating sleeves.
• Same size and opposite side terminations.
• Cadmium free contacts.
Technical parameters of 17AMI thermal protector:
Rating: 22 A / 115 V— AC, 10 A / 250 V— AC, 20 A / 16 V— DC
Action temperature range: 55 ºC~ 185 ºC ±5ºC
Tolerance:±5ºC
Dimension: 23×10.4×4.6 mm
Contact resistance:<40mΩ
Isolationsmotstånd:>100MΩ
Response speed:≤1ºC/min
Operation cycles: >10000 Times
Approvals: UL CSA TUV CQC RoHS
Ansökningar:
• Shaded Pole Motor
• Permanent split capacitor motor
• Fluorescent lighting ballasts
• HID ballasts
• Transformer
• Recessed lighting fixtures
• Battery packs
• Vacuum cleaners
• Automotive accessory motors, solenoids, PC boards
| -Varför välja oss— |
| Guanjun (L&G) Electronics specialize in this field more than 20 år,with good quality and pretty competitive price |
| . Variety of Designs, Provide Professional & Original Fashionable Designs, with more than thousand designs |
| . Original manufacturer with direct factory price, Competitive & Fashionable |
| . High management Standard for quality control |
| . Small order acceptable: 500pcs are welcome |
| . Safe payment terms: T/T, Western Union, are available |
| . Prompt Delivery & Lowest shipping cost : We can ship out within 30 days for general order |
| . OEM available, Customers’ designs are warmly welcome |
1.Once we get your inquire for our switches, we will reply you within 30 min
2.Checking the drawing and all details of our switches with you, if you think it is ok, then we need your signature on our drawing for final confirmation.
3.Quotation will be sent to you accordingly.
4.After getting your signed quotation, samples will be sent to you immediately.
5.If our switches passed your testing, you may release to us.
6.Receiving your official order, we will let you know our shipping date soon.
7.Paying 50% for us, we will start to proceed your order to keep the goods finished on-time.
8.Balance 50% payment before shipment.
9.Getting all payment from you, goods will be shipped to you per your requested shipping way
Prover & Förpackning & Frakt:
1)Prover:
A.Free for you, Quantity less than 6 st, freight collected.
B.Lead time for samples: 3~7 days for preparing samples.
2) Frakt
A.Couriers:Fedex, DHL, UPS, TNT
B.Other: Air or by Sea
As we have a long time cooperation with Courier agent, we can get a priority price for you. We can quote you the transportation charges at first for your comparasion.
FAQ
Q1–Vad är din MOQ?
In general ,our MOQ is 500 st, it will be more convenient and safety on packaging. Of course, it can be negotiable according to your situation.
Q2–Vad är leveranstiden ?
3-7 days for samples; 10-30 days for batch goods.
Q3–Can you give me samples to test and how many samples?
Ja, we provide free samples, with shipping and taxes paid by the buyer. Usually, free samples are 1~10 pieces.
Q4–Does your products through UL, ROHS certification and so on?
Ja, our switches are with UL, CUL, VDE, TUV, ENEC, CE, CQC, Nemko, CB approved, meet EU, RoHS standard.
F5–Can you accept OEM?
Ja, we can accept OEM and ODM, they are welcome by us. But please offer us your authorization certification.
F6–Is there cheap shipping cost to our country?
For small order, express will be best. And for bulk order, shipping by sea is better, but it takes much time.