603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device

Modell nr.
AS603040

Max Discharge Current
1c

Prov
Tillgängliga

Produktnamn
P603040 3.7V 750mAh Lipo Pouch Battery Cell

Welcome
OEM/ODM

Transportpaket
Carton Package

Specifikation
6.2*31*42.5mm

Varumärke
A&S Power

Ursprung
Kina

HS-kod
8507600090

Produktionskapacitet
5000pieces/Month

Beskrivning

603040 3.7V 750mAh Lithium Ion Polymer Battery For Medical Device

Beskrivning:
1.Modell: AS603040
2:Spänning:3.7V
3:Kapacitet:750mAh
4.For bluetooth headphone/bluetooth speaker

Parameter Table

Punkt Rating Note
Nominal Capacity 750mAh Ansvarsfrihet:0.2CmA
cut off Voltage:3V for cell
Nominell spänning 3.7V Ansvarsfrihet:0.2CmA
cut off Voltage:3V for cell
Discharge Cut-off Voltage 3.00V
Charge Current 150mA Standard Charge
Charge Voltage 4.2V
Max. Charge Voltage 4.23V
Storage humidity < 75%RH Hyometer
Fast Charge current 750mA 1.0CmA
Fast Discharge Current 750mA 1.0CmA
Operating
Temperatur
Charge 0~+45ºC Can be operated at max Altitude 3000m and 8%~90% humidity.
Ansvarsfrihet -10~+50ºC Get more than 50% discharge capacity (typical) in -15°C or +55°C.
Storage
Temperatur
less than 1 month -10~+45ºC Recommended storage temp: 20ºC,at the shipment state.
less than 3 months -10~+35ºC

Product Picture:

603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device

Main features:
1) Environmental friendly
2) High density of energy
3) Lätt vikt
4) Low self-discharge
5) Low internal resistance
6) Long cycle life, chargeable up to 500 gånger
7) No memory effect
8) Doesn’t contain Mercury, No fire, No explosion, Inget läckage
9) Very good and quick charge, capability can be charged to 90% inom 10 min.
10) Thickness can be adjusted while width and height keep the same.

603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device
Ansökan:
1)MP3/MP4 player, Bluetooth, speakers, car GPS and all possible electronics products
2)Widely applied in Telecommunications, Audio and Video Devices, Information DevicesEtc.

603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device

Vår tjänst:
603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device

Low Risk Promise

1. For lithium polymer battery, we can provide 5pcs( kapacitet < 500mAh) of free samples and buyers pay for the shipping cost. If items in stock, we can send out sample within 5 dagar.
2. For order over 2000pcs, Buyer gets a cash coupon of 50 USD for next order
3. For order over 10000pcs, Buyer gets a cash coupon of 100 USD for next order

Our cooperative policy

1. Making the sample until you are satisfied with it.
2. Offering professional one-on-one service and replying your E-mail within 12 timmar
3. Inspection before shipment.
4. Priority to get the our latest product information after our cooperation

One-Year-Warranty

We want you to be fully satisfied with every item that you purchase from A&S Power.
Furthermore, we also provide one-year warranty for batteries.
And if any quality problems, not caused by improper use or man-made, A&S Power will replace it one by one.

Market and Technical support email within 24 timmar”

Paket&shipping
603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device

603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device

Shipping methods
Destination Normally arrive at port time in working days
Ship by express Ship by sea Ship by air
North America 3-7 dagar 15-28 dagar 5-7 dagar
Sydamerika 3-7 dagar 15-30 dagar 5-7 dagar
European 3-7 dagar 20-30 dagar 5-7 dagar
Afrika 5-7 dagar 45-50 dagar 5-7 dagar
The Middle East 3-5 dagar 15-30 dagar 3-5 dagar
Australia 3-7 dagar 10-20 dagar 5-7 dagar

Other KC/UL approved lithium polymer battery model as below:
(some models with CB/UEC62133/UN38.3)

Modell Cell Dimension With PCM Dimension Kapacitet
302025 3.0*20*25mm 3.2*21*27.5mm 3.7V 100mAh
302530 3.0*25*30mm 3.2*26*32.5mm 3.7V 180mAh
401824 4.0*18*24mm 4.2*19*26.5mm 3.7V 180mAh
402525 4.0*25*25mm 4.2*26*27.5mm 3.7V 200mAh
483450

4.8*34*50mm

5.0*35*52.5mm 3.7V 850mAh
502030 5.0*20*30mm 5.2*21*32.5mm 3.7V 240mAh
502525 5.0*25*25mm 5.2*26*27.5mm 3.7V 180mAh
503030 5.0*30*30mm 5.2*31*32.5mm 3.7V 430mAh
523450 5.2*34*50mm 5.4*35*52.5mm 3.7V 1000mAh
553444 5.5*34*44mm 5.7*35*46.5mm 3.7V 850mAh
553640 5.5*36*40mm 5.7*37*42.5mm 3.7V 850mAh
553759 5.5*37*59mm 5.7*38*61.5mm 3.7V 1400mAh
602030 6.0*20*30mm 6.2*21*32.5mm 3.7V 300mAh
602240 6.0*22*40mm 6.2*23*42.5mm 3.7V 500mAh
602535 6.0*25*35mm 6.2*26*37.5mm 3.7V 500mAh
602663 6.0*26*63mm 6.2*27*65.5mm 3.7V 1000mAh
603030 6.0*30*30mm 6.2*31*32.5mm 3.7V 520mAh
603040 6.0*30*40mm 6.2*31*42.5mm 3.7V 750mAh
603048 6.0*30*48mm 6.2*31*50.5mm 3.7V 900mAh
603450 6.0*34*50mm 6.2*35*52.5mm 3.7v 1050mAh
702040 7.0*21*40mm 7.2*22*42.5mm 3.7V 500mAh
753048 7.5*30*48mm 7.7*31*50.5mm 3.7V 1200mAh
803035 8.0*30*35mm 8.2*31*37.5mm 3.7V 800mAh

Company Introduction:

A&S Power Technology Co., Ltd. was established in 2001, and specialize in manufacturing and exporting rechargeable lithium battery, like li-ion battery, li-polymer battery and LiFePO4 battery.

Company Overview

  • Established : 2001
  • Capital: 20,000,000.00 RMB
  • Location: Dongguan,Shenzhen
  • Employee: > 600
  • Daily output: 100K Li-Poly, 50K LiFePO4, 80K Li-ion 18650

603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device

  • OEM rechargeable battery manufacturer in China over 15 år
  • Specialized in Lithium polymer battery, LiFePO4 battery and Li-ion Battery pack
  • Our batteries got UL, KC, BIS,IEC62133, CB, CE, ROHS certifications
  • We’re officially recognized by Skullcandy, Flex, Mitel etc. from 2013.
  • We have succeeded in selling our batteries to the international markets of America, Canada, Europe, Afrika, middle-east and South Asia.
  • A&S Power has well presence in international fairs each year, such as CEBIT,Intersolar, KES, HK Electronic Fair

603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device
603040 3.7V 750mAh Lithium Ion Polymer Battery for Medical Device
FAQ

1. Q:Where can I get the price?

A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we’ll regard your inquiry priority.

2. Q: How can I get a sample to check your quality?

A: After price confirmation, you can require for samples to check our quality.

3. Q: What about the lead time for mass production?

A: Honestly, it depends on your order quantity and the season you place the order. We suggested t hat you start inquiry two months before the date you would like to get the products at your country.

4. Q: Vilka är dina betalningsvillkor?

A: We accept T/T and L/C.

More battery model please contact us .
Looking forward to your inquiry soon and thanks for your viewing.