Описание
1. About the bms
| Mode | LWS-16S200A-Smartbms rev2.0 |
| PCM Size | L255*W155*T11 mm |
| battery series | 4S-16S Available |
| working current | ≤200A Available |
| Port for charge/discharge | Same port |
| Communication protocol | 12С |
| Communication tools | Bluetooth, LCD display, Host PC |
| Использование (Cell Type) | Li-ion battery packs (3.7V/cell) LiFePO4 battery packs (3.2V/cell) |
| Приложение | E-bike, E-bicycle, E-Richshaw, Electric three-wheeler, UPS, Electric equipment, так далее |
| Образец | available |
2.Wiring Diagram
Direction for use Wiring:
1. Connect Battery B- with BMS B- firstly!
2. Connect Battery 1, Battery 2,…Батарея 8 with the BMS as the picture shows.
(Please weld the wires in order and avoid pseudo solder joints.)
3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
Pay attention to make insulation.
3.Технические характеристики
| PCM Specifications For 25.6V (8S) LiFePO4 Battery Packs | |||
| Модель: LWS-16S200A-Smartbms rev2.0 (16S) | |||
| no | Test item | Criterion | |
| 1 | voltage | Charging voltage | округ Колумбия: 28.8V CC/CV |
| Balance voltage for single cell | 3.6V±0.025V | ||
| 2 | current | Balance current for single cell | 60±10mA |
| Current consumption: working | ≤600μA (25С) | ||
| Current consumption: I2C communication | ≤2000μA (25С) | ||
| (average) Current consumption: sleep mode | ≤350μA (25С) | ||
| Current consumption: Bluetooth | ≤50μA (25С) | ||
| Maximal continuous charging current | 200А | ||
| Maximal continuous discharging current | 200А | ||
| 3 | Over charge protection | Over charge detection voltage for single cell | 3.75±0.025V |
| Over charge detection delay time | 0.5S-1.5S | ||
| Over charge release voltage for single cell | 3.55±0.05V | ||
| 4 | Over discharge protection | Over discharge detection voltage for single cell | 2.20±0.05V |
| Over discharge detection delay time | 15mS-150mS | ||
| Over discharge release voltage for single cell | 2.70±0.1V | ||
| 5 | Over current protection | Over current detection voltage | 0.20±0.015V |
| Over current detection current | 600A-700A | ||
| Detection delay time | 7.2ms-11ms | ||
| Release condition | Cut load, Auto release | ||
| 6 | Short protection | Detection condition | Exterior short circuit |
| Detection delay time | ≤800us | ||
| Release condition | Release short-circuit, auto recovery | ||
| 7 | Resistance | Protection circuitry(MOSFET) | ≤5mΩ |
| 8 | Температура | Operating temperature range | -20~+65ºC |
| Storage temperature range | -20~+70ºC | ||
| 9 | Temperature Protection | High Temperature Protection during Charge | 65С |
| High Temperature release | 45С | ||
| High Temperature Protection during Discharge | 65С | ||
| High Temperature release | 45С | ||
3.Company information
Shenzhen Li-ion Battery Bodyguard Technology Co.,Ltd was founded in 2013.
Mainly provide Battery PCM & BMS for Lithium ion ,Lifepo4 ,LTO battery pack.
Since 2013, the company has more than 400 types of hardware PCM/BMS,and software BMS including HDQ/12C/SMBUS/RS482/RS232 & Bluetooth and so on. Mainly covers battery assembly 1S-35S in series ,working current up to 350A;the products are widely used in solar street lamp,golf ,LED light,power tool,electric bicycle,medical equipment,EV application……так далее.
(Widely used)
4.Transportaion
Упаковка: Inner packing:Vaccum packing/Plastic bag.
Outer packing:Standard carton packing or packing per customer’s requirements.
Delivery type:by air such as TNT,UPS,FEDEX or by sea ,just depend on your convenient.
Оплата:аккредитив,Т/Т,Western Union,PAYPAL ,Bank ,так далее.
5.Вопросы-Ответы
вопрос: How do I judge what material my battery is ?
3.2V cell, LiFePO4;3.6V or 3.7V, Li-ion or Li-polymer battery.
You can also ask battery manufacturer the material of battery.
вопрос: Can I use this protection circuit board for my battery?
А: The protection circuit board you need to buy must be same cells in series as your battery pack.
Please also tell us your battery material: LiFePO4 or Li-ion battery? As well as, working current, application, motor wattage, так далее.
вопрос: Do you have Minimum Order Requirement (минимальный заказ)?
А: No.We can provide various capacity and size is per your requirements, Also ODM / OEM is welcome.
About your products,just tell us the relative voltage/ cells/ current A or equipment etc,we will help to recommend the most suitable products for you.