Metal Pneumatic Contactor 8mm for Heavy Duty Connector

Модель №.
SO-PCM-OD8.0

Gender
Male

Poles
2-8, 1

Housings
Metal

Contact Finish
Male & Female

Fastening Type
Crimping

Termination
Connect

Тип монтажа
Through Hole

Pollution Degree
3

Rated Impulse Voltage
4kv

Flammability
Vo

Limiting Temperature
-40oc~+80oc

Mechanical Working Life
Above 500

Working Voltage Acc to UL/CSA
600В

Транспортный пакет
Картонная коробка

Технические характеристики
1p

Товарный знак
SMICO

Источник
Китай

Код ТН ВЭД
8536909000

Производственная мощность
10000

Описание

Metal Pneumatic Contactor 8mm for Heavy Duty ConnectorCable entry protection:
1. Universal cable glands
2. Special cable clamp with strain relief,bell mouthed cable fitting and anti-twist devices
3. Cable gland with normal or multiple seal
4. Extensive range of accessories

Hoods:
1. low or high construction
2. Top or side cable entry .1 or 2 locking levers
Male insert with:
1. screw terminal or crimp terminal(order contacts separately) or cage-clamp terminal
Female insert with:
1. screw terminal or crimp terminal(order contacts separately) or cage-clamp terminal
Housing:
1. Housing(bulkhead mounting) with or without thermoplastic or metal covers,1 or 2 locking levers
2. Housing(surface mounting) low or high construction with or without thermoplastic or metal covers,1 or 2 locking levers,1 or 2
cable entries
3. Hood(cable to cable) low or high construction for cable to cable connections
Accessories:
1. Protective covers available
2. Code and guide pins for coding
3. Special insert fixing screws for use without hoods and housings
4. Label according to CSA-approval

Metal Pneumatic Contactor 8mm for Heavy Duty Connector

Характеристики
Insert
Rated voltage acc. to UL/CSA
600В
Insulation resistance
≥1010Ω
Limiting temperatures
-40С…+80С
Flammability acc. to UL 94
V0
Mechanical working life(mating cycles)
≥500
Contacts
Материал Nickel-plated brass
Pipe internal diameter (8.0mm/1/3′)
(10.0mm/1/2.5′)
Working pressure up 8 bar/116 psi
Sealing NBR
Shut off valve Polypropylen

Metal Pneumatic Contactor 8mm for Heavy Duty Connector
Характеристики:

Two levers at the bottom part of the housing
* Secure locking ensured by four locking points
* Minimal space requirements and high locking force
* Ideal for laterally arranged connectors
Two levers on the hood
* Secure locking ensured by four locking points
* Minimal space requirements and high locking forces
* Ideal for laterally arranged connectors and surface-mounted housings with caps
One lever at the bottom part of the housing
* Two locking points along the longitudinal axis
* Easy to access even with cable entering laterally
* Cap on the upper part of the housing can be locked

Hood&Housing
Материал
aluminium die-cast
Colour
Grey
Locking element
Lever type
metal elastic pressing
—Материал
Stainless steel
Hoods/Housing sealing
NBR
Limiting temperatures
-40С…+125С
Flammability acc.to UL 94
V0
Degree of protection acc.to EN 60529 for coupled connector
IP65

Metal Pneumatic Contactor 8mm for Heavy Duty Connector

Contacts
Материал
copper alloy
Surface
hard-gold plated
hard-silver plated
Contact resistance
≤1mΩ
Crimp terminal
Wrie gauge
0.14-2.5mm2
AWG
26-14
Stripping length
7.5мм

Metal Pneumatic Contactor 8mm for Heavy Duty Connector

Cable gland
Metal cable gland
Plastic cable gland
Hose cable gland
Материал:
Nickel-plated brass
Nylon
Nylon
Seal Material
NBR
NBR
Степень защиты
IP68
IP68
IP54
Temperature range
Stat:-40ºC-100ºC
Dyn:-20ºC-80ºC
Stat:-40ºC-100ºC
Dyn:-20ºC-80ºC
-40ºC-+150ºC

Metal Pneumatic Contactor 8mm for Heavy Duty ConnectorMetal Pneumatic Contactor 8mm for Heavy Duty Connector

Contact Removal Tool

Insert tool from the mating side of the connector until it comes to a stop by putting additional pressure on the tool the contact is
unlocked and pushed out towards the termination side when using the removal tool the contact is unlocked by pushing the
central plunger after that the contact with the attached wire can be pulled out of the isolator body.

Metal Pneumatic Contactor 8mm for Heavy Duty ConnectorMetal Pneumatic Contactor 8mm for Heavy Duty ConnectorZhejiang Smico Electrical Technology Co.,Ltd is a company specializing in heavy duty connector Research,production and sales
as one integrated high-tech enterprises,with many years of professionaland technical strength and long-term development goals.
In the companyto the quality ofsurvival,to the credibility of developmentand absorbing the international advanced technology
and design concept,is committed to providing high quality products and the best service,make the products on the market can
be a leading position.
Metal Pneumatic Contactor 8mm for Heavy Duty ConnectorMetal Pneumatic Contactor 8mm for Heavy Duty Connector