Описание
1. General Issues
1.1.All documentation should be English
1.2.Machine operating manual including DWG. of Hydraulic, Pneumatic, Assembly drawing, Cooling water.
1.3.Максимум. volume of product:15L
1.4 Total weight 18 ton
1.5 Максимум. output 120 pcs/h (product net weight 1kg,Sufficient cooling water temperature at 8ºC with an intake pressure of between 3.5 к 4.5 bars, with a Min. difference between intake and outlet of 3 bars. )
2. Clamping unit
Adopt reliable two-plate axes mold locking.
Double station.
Mold carriage stroke: 880
Linear roller guidance horizontal HIWIN
Clamping force: 270KN
Mold platens H x W 660 x 580 мм
Distance between the platens: 450-950 мм
Auto lubrication for clamping unit
3.Die Head
Type of die head: continue head with view stripe(optional)
Type of temperature sensors: K
Heating power: 3КВт(single phase)
100 point WDS system controller
4. Extuder System
Extruder should be adequate to work with HDPE, PP
Screw diameter: 90/25Д
Nitride treatment barrel and screw.
Plasticizing efficiency: 180kg/h (HDPE)
Cast-aluminium heater, adopt European mode of connection
AC motor drive: 55-75 КВт,frequency control
Cooling by four cooling fans.
5.Blow system
Blow system mounted above the mold.
Mechanical adjustment for up/down ,left/right and backfront
Blow pin distance 220mm
Stainless steel for blow pin special part to protect them from getting rust.
6. Deflashing and post cooling system
Upper and down defashing
Handle deflashing
Post cooling by cooling air and cooling water with Aluminum Mask
7.Take out system
Take out stroke 880mm
pneumatic rodless cylinders with shaped products of vice mode
8. Servo Hydraulic System
Hydraulic working pressure LP 140 bar / HP 160 bar
Hydraulic system with servo pump: 200L/min (DAIKIN or REXROTH Brand)
Main Hydraulic Directionalvalves :YUKEN
Servo Motor power: 22 КВт
9.Pneumatic system
Pneumatic cylinders AIRTEC
Pneumatic valves AIRTEC
Максимум. pressure of all components: 10 bar
Максимум. pressure of gauge:6 bar- 8 bar
Air consumptions: 2.2 m3/min
10.1 Control System: B&р (Austria)
10.2 Servo system control system: B&R100 point Austria
10.3 Full color press-botton & Touch screen.
10.4 Recipe and machine data storage on memory stick (CF)
10.5 Emergency stop push buttons (rotationally release) without key
10.6 All electric components needs to be for power supply 220V/380V, 50Hz, controller DC24V, signal 0-10V
10.7 Total rated power: 97 КВт
10.8 Average energy consumption: 50КВт
10.9 Main components (Air switch, Contactor): SCHNEIDER ,intermediate relay:SCHNEIDER
10.10 Inverter of extuder motor: YASKAWA
10.11 Linear transducer: Gefran from Italy
10.12 Proximity switch: Schneider
KINGSMAN Located in ZhangJiaGang City,Jiangsu Province, 2 часы’ driving from Shanghai Airport
KINGSMAN is the leadership of Extrusion blow moulding machine manufacturer Which had long-Term cooperation with KUATEX TEXTRON company from year 2010-2013 for 6 layer fuel tank machine.
KINGSMAN Company is espeicalized in Automatic Blow Moulding machine with High production.and now focus on Servo hydraulic machine for energy saving.
