Descrição
LIFTOR Concrete Mixer Features:
1. High torque motor
Adopting BM5 high torque motor, the reducer is a reasonable ratio of two-stage high torque and higher efficiency
2. Man-sized radiator
Independent cooling system to ensure the control of oil filtration quality and temperature.
3. Double gear pump
High pressure, not easy to wear, increase the oil inlet and outlet to ensure the flow of the whole machine
4. Oilless bushing
Use oilless bearings, only need to inject butter once a year,wear resistance is 100 times that of ordinary sleeves.
5. Tubing
The whole vehicle’s oil pipe adopts the 24 °international standard H-type joint, which has no oil leakage and oil leakage, and has a large flow.
6. Drive axle
The driving shaft adopts medium and large wheel side bridge, which is stable Low operating noise.
7. Gyroscope
The slewing bearing has a five-year warranty and uses a well-known domestic gyrator (imported worm motor)
8. The electronic weighing system
The Load cells are acting on the drum and technical data are displayed on the shovel loader weigher inside the cab.Two sets of joystick control system are situated on the two sides of driver’s seat.
9. Color Monitor
The operation situation from the four sides of machine could be shown clearly on the Color Monitor, which increase the driving safety.
LIFTOR Concrete Mixer Details:
LIFTOR Concrete Mixer Model:
1.2M3 Concrete Mixer:
| Item No. | H12 | |
| Engine Type | Yunnei490 Turbocharging | |
| Engine power(KW) | KW | 58 |
| Drum Capacity(m³) | m³ | 2 |
| Valid output(m³) | m³ | 1.5 |
| Overall dimension Length*Width*Height(milímetros) | milímetros | 5350*1800*2900 |
| Axle base | milímetros | 2450 |
| Front wheel base | milímetros | 1500 |
| Rear wheel base | milímetros | 1500 |
| Dumping height | milímetros | 1080 |
| Minimum ground clearance(milímetros) | milímetros | 270 |
| Total weight(KGS) | KGS | 4500 |
| Fuel consumption (Theoretical)L/H | L/H | 5.0-7.0 |
| Maximum drive speed | KM/H | 25 |
| Tank rotation speed | Turn/minute | 16 |
1.5M3 Concrete Mixer:
| Item No. | H15 | |
| Engine Type | Yunnei490 Turbocharging | |
| Engine power(KW) | KW | 58 |
| Drum Capacity(m³) | m³ | 2 |
| Valid output(m³) | m³ | 1.5 |
| Overall dimension Length*Width*Height(milímetros) | milímetros | 5350*1800*2900 |
| Axle base | milímetros | 2450 |
| Front wheel base | milímetros | 1500 |
| Rear wheel base | milímetros | 1500 |
| Dumping height | milímetros | 1080 |
| Minimum ground clearance(milímetros) | milímetros | 270 |
| Total weight(KGS) | KGS | 4500 |
| Fuel consumption (Theoretical)L/H | L/H | 5.0-7.0 |
| Maximum drive speed | KM/H | 25 |
| Tank rotation speed | Turn/minute | 16 |
2.0M3 Concrete Mixer:
| Item No. | H20 | |
| Engine Type | Yunnei 4102 Turbocharging | |
| Engine power(KW) | KW | 76 |
| Drum Capacity(m³) | m³ | 3.5 |
| Valid output(m³) | m³ | 2 |
| Overall dimension Length*Width*Height(milímetros) | milímetros | 5450*2450*2800 |
| Axle base | milímetros | 2400 |
| Front wheel base | milímetros | 1620 |
| Rear wheel base | milímetros | 1620 |
| Dumping height | milímetros | 1250 |
| Minimum ground clearance(milímetros) | milímetros | 280 |
| Total weight(KGS) | KGS | 6200 |
| Fuel consumption (Theoretical)L/H | L/H | 6.0-8.0 |
| Maximum drive speed | KM/H | 25 |
| Tank rotation speed | Turn/minute | 16 |
| Tank rotation angle | ° | 180/270 |
3.0M3 Concrete Mixer:
| Item No. | H30 | |
| Engine Type | Yuchai 4105 Turbocharging | |
| Engine power(KW) | KW | 85 |
| Drum Capacity(m³) | m³ | 5 |
| Valid output(m³) | m³ | 3 |
| Overall dimension Length*Width*Height(milímetros) | milímetros | 6150*2700*3350 |
| Axle base | milímetros | 2450 |
| Front wheel base | milímetros | 1680 |
| Rear wheel base | milímetros | 1680 |
| Dumping height | milímetros | 1400 |
| Minimum ground clearance(milímetros) | milímetros | 290 |
| Total weight(KGS) | KGS | 8000 |
| Fuel consumption (Theoretical)L/H | L/H | 8.0-10.0 |
| Maximum drive speed | KM/H | 25 |
| Tank rotation speed | Turn/minute | 18 |
| Tank rotation angle | ° | 180/270 |
4.0M3 Concrete Mixer:
| Item No. | H40 | |
| Engine Type | Weichai 6105 Turbocharging | |
| Engine power(KW) | KW | 92 |
| Drum Capacity(m³) | m³ | 6.5 |
| Valid output(m³) | m³ | 4 |
| Overall dimension Length*Width*Height(milímetros) | milímetros | 6650*2860*3350 |
| Axle base | milímetros | 3200 |
| Front wheel base | milímetros | 2000 |
| Rear wheel base | milímetros | 2000 |
| Dumping height | milímetros | 1500 |
| Minimum ground clearance(milímetros) | milímetros | 300 |
| Total weight(KGS) | KGS | 10500 |
| Fuel consumption (Theoretical)L/H | L/H | 10.0-12.0 |
| Maximum drive speed | KM/H | 30 |
| Tank rotation speed | Turn/minute | 20 |
| Tank rotation angle | ° | 180/270 |
5.0M3 Concrete Mixer:
| Item No. | H50 | |
| Engine Type | Weichai 6105 Turbocharging | |
| Engine power(KW) | KW | 92 |
| Drum Capacity(m³) | m³ | 8 |
| Valid output(m³) | m³ | 5 |
| Overall dimension Length*Width*Height(milímetros) | milímetros | 6750*2860*3650 |
| Axle base | milímetros | 3200 |
| Front wheel base | milímetros | |
| Rear wheel base | milímetros | |
| Dumping height | milímetros | 1500 |
| Minimum ground clearance(milímetros) | milímetros | 320 |
| Total weight(KGS) | KGS | 13000 |
| Fuel consumption (Theoretical)L/H | L/H | 10.0-12.0 |
| Maximum drive speed | KM/H | 30 |
| Tank rotation speed | Turn/minute | 20 |
| Tank rotation angle | ° | 180/270 |
LIFTOR Concrete Mixer Delivery:
About US:
LIFTOR ENTERPRISES is a high-tech enterprise professionally specialized in R& D, production, vendas, service of electric storage and construction machine. It is located in Nanjing, Jiangsu Province with advanced forklift manufacturer technology, processing equipment and perfect product testing center.
LIFTOR has already passed the safety production standardization and the quality authentication of ISO9001: 2008 and European Union CE certification, fit-out national patent certificate.
Our main construction are self-load concrete mixer machine, carregadeira de rodas, excavator and so on. It is widely used in various places of construction.
Our brand LIFTOR is well sold in more than 50 countries worldwide and has earned an enviable reputation for high quality products. With our professional R& equipe D, we are able to provide customization services with the most professional quality and never stop meeting the highest standard of safety.
LIFTOR will never stop being as an innovative manufacturer. We will continue to develop and extend our products range with high quality, safety standard and long life usage.
Perguntas frequentes:
1.Q: Are you a manufacturer?
UMA: sim, we are a manufacturer located in Jiangsu province which in the manufacturing center of construction machinery. We have passed ISO and CE certificate and our products have been exported to over 20 countries.
2.Q: Why choose LIFTOR?
UMA:With our two factories and more than 300 trabalhadores, we only produce very high quality products.2 Years warranty and only 1% repair rate during the past 10 anos, which is cost effective and win good reputation.
3.Q: Can you produce customizable machines?
UMA: sim, we can provide customizable machines according to your requirements. We have 8 senior engineers and can design and supply higher configuration.
4.Q: How about your After-sales service
UMA: We have 3 aftersales, and can provide 24-hour technical support by phone and email.
UMA: Normal goods usually take 7-10 dias, and customization takes 15-25 dias
6.Q: Is it convenient to visit your factory? How to go there?
UMA: Warmly welcome to visit our factory. When you arrive, we will pick you up.