Descrição
Machine application:
The machine is used for mass-producing cylindrical parts, ring parts in the way of centerless through feeding. And it also can be used for grinding cone parts with taper less than 1∶20 and molding rotational parts in the way of centerless in-feeding after being equipped optional in-feed mechanisms.
Machine configuration & characteristics:
1. Only reg. wheelhead feeding.
2. Single side supporting GW. spindle. Easy to change the wheel.
3. Multi-piece dynamic pressure bearing is used on GW. spindle.
4. Single side supporting RW. spindle. Easy to change the wheel.
5. Inner cone sliding bearing is used on RW. spindle.
6. AC converter motor regulates RW. Speed steplessly.
7. Customer can order optional mechanisms of in-feed mechanism to enhance machine performance.
Technical parameters:
| Workpiece diameter: | |
| Through feeding(standard workrest) | 5~50mm |
| In-feeding(optional) | 7~50mm |
| Máx.. grinding length for jobs (standard workrest) | 120milímetros |
| G.W. specification | P400×150×203mm |
| R.W. specification | PSA300×150×127mm |
| G.W. speed | 1668r/min |
| R.W. speed (stepless) | 20~200r/min |
| R.W. swiveling angle | |
| In vertical plane | -2°~ +5° |
| In horizontal plane | -1°~ +3° |
| One dial division of handwheel | 0.002milímetros |
| Plunge-in strike (optional) | |
| Total strike | 3.5milímetros |
| Rapid strike | 2.0~3.5mm |
| Slow strike | 0~1.5mm |
| The distance between the center line of GW. and RW. to the bottom of workrest | 220milímetros |
| Total power | 13.78kw |
| Machine overall dimension | 1920mm×1681mm×1479mm |
| Net weight | 2800kg |
Machining accuracy:
(standard testpiece Φ20×90m, 45#steel)
| Roundness | 0.002milímetros |
| Dia. consistency | 0.002milímetros (thru-feed) |
| 0.003milímetros (plunge in) | |
| Roughness | Ra0.32um |