Descrição
Manufacturer Li-ion battery pack LiFePO4 Battery Pack Lead Acid Replacement Battery for Medical Apparatus/E-Bike/sprayer/Lights
12.8V100Ah LiFePO4 battery pack
Especificação:
| UBETTER TECHNOLOGY | |||
| LiFePO4 Battery Pack 12.8V100Ah | |||
| Modelo:UB-L03S009-082 | |||
| Item | Especificação | Remark | |
| Nominal capacity | 100Ah | 48173166 3.2V150Ah | |
| Nominal voltage | 12.8V | 3.2V / 1Cell | |
| Tensão de carregamento | 12.6V±0.05V | 3.6V / 1Cell | |
| Charging method | CC/CV | (Constant-current and -Voltage with Limited current | |
| Standard charging time | 0.2C/5hour,0.5C/2hour | Battery capacity÷charging current×1.5 | |
| charging current | 0.5C | 0 ~ +40C | |
| Maximum charging current | 1C | 0 ~ +40C | |
| Continuous discharge current | 1C | -20 ~ +60C | |
| Discharge cutoff voltage | 10V | 2.5V / 1Cell | |
| Short circuit protection | Curto-circuito externo | Automatic recovery | |
| Internal resistance | ≤160mΩ | AC Impedance 1kHz | |
| Cycle life | ≥2000 | ||
| Operating temperature | Standard Charge | 0 ~ +40C | |
| Standard Discharge | -20 ~ +60C | ||
| Outline dimension | L330 *W173*T215mm | Length x wide x height | |
| Protection Circuit Module:PCM-B03S10-188 | |||
| Maximal continuous charging current | 150UMA | ||
| Maximal continuous Discharging current | 150UMA | ||
| Over-charge detection voltage | 3.9V ±0.025V | single cell | |
| Over-charge release voltage | 3.8±0.05V | single cell | |
| Over-charge detection delay time | 0.7S-1.3S | single cell | |
| Over-discharge detection voltage | 2.V±0.062V | single cell | |
| Over-discharge release Voltage | 2.5±0.10V | single cell | |
| Over-discharge detection delay time | 89-167mS | single cell | |
| Over-current detection | 300±5A | can adjust | |
| Over-current delay time | 6.7ms-13.9ms | ||
