Solar System 3p Power Surge Protector

Model NO.
CLBZSPD

Shape
Square

Material
UL 94V0 Thermoplactic

Certification
CCC

Brand
C.Lbe

Color
Red,White

Protection Level
IP20

Ambient Temperature
-40ºC-+80ºC

Outline Size
36*66*90mm,54*66*90mm

Transport Package
Carton

Specification
54X66X90

Trademark
C. LBE

Origin
Zhejiang Yueqing

HS Code
853630000

Production Capacity
100000/Week

Description

Solar System 3p Power Surge Protector
Solar System 3p Power Surge ProtectorSolar System 3p Power Surge ProtectorSolar System 3p Power Surge Protector
cope of application

     CLBZSPD series photovoltaic special DC surge protection device(SPD) used in lightning protection of solar photovoltaic power generation system or other Dc power green means normal,red to represent the fault ,must be replaced and legible;optional remote communication  interface,the realization of remote monitoring :high working voltage ,high safety and stability
  The product can be pluggable modular design ,standard guide installation ,selection of high-quality photovoltaic professional professional lightning protection devices,stable performance ,built-in hot meit ,flow in dual protection circuit,visualization window,normal green,red fault ,large flow capacity,low residual voltage ,fast response(nanosecond),with remote monitoring function,convenient remote monitoring (optional).
Product Introduction
 
This DC surge protection device is protect against DC power line system and other equipment from over voltage and instantaneous over voltage damage.Widely used in photovoltanic combiner box,power inverter,DC distribution cabinet etc.It has advantages of large discharge current,fast respond time,low residual voltage.
Features
1.Plug-in type surge protective device
2.Visible window,green means normal,red means fault
3.Double protection of fusing and over-current
4.Remote signal interface that realiza remote control
Electrical Parameters

Model CLBZSPD-40 CLBDSPD-40
Maximum Continuous Operating Voltage Uc 500V DC 800V DC 1000V DC 1200V DC 1500V DC 1800V DC
Nominal Discharge Current (8/20µs) 20KA
Maximum Discharge Current(8/20µs) 40KA
Poles 2P 3P 3P 3P 3P 3P
Voltage Protection Level Up ≤1.8KV ≤2.9KV ≤3.6KV 3.8KV 4.2KV 6.8KV
Response Time tA ≤25ns ≤25ns ≤25ns ≤25ns ≤25ns ≤25ns
Indication Method Visible window,Green=normal, Red=fault
Min. sectional area of incoming wire L/N 4mm2 4mm2 4mm2 4mm2 4mm2 4mm2
Min. sectional area of incoming ground wire PE 6mm2 6mm2 6mm2 6mm2 6mm2 6mm2
Method of   Installation 35mm Din Rail
Material of   Shell PBT
Protection Level   of Outer Shell IP20
Working   Temprature -25 -+70ºC

Installation
1.Do power off when when connect surge protection device to system
2.Ground wire should be as short,straight and thick as possible to reduce the influence of distributed in ductance on lightning discharge.
3.No need special maintenance.when surge protector happens fault,equipment connected to remote sign all will send alarm,then power off and change new SPD mould is fine
Dimension and wiring Diagram
Solar System 3p Power Surge Protector

Outline Dimension
Solar System 3p Power Surge Protector
Application
Solar System 3p Power Surge Protector

Solar System 3p Power Surge Protector
Related products
Solar System 3p Power Surge Protector

Our company
Solar System 3p Power Surge Protector

Solar System 3p Power Surge Protector