Description
1. FEATURES
- This machine may be used for surface cutting,drilling,milling,and tapping.
- This machine is of fine quality,can be operated easily, it is not limited
to skilled operator.
- The drilling and milling operation can be performed by two methods:
- Hand operation,which makes quick feed drilling.
- Worm gear feed operation,which makes slow feed milling.
- Many of the adjustable nuts are bronze,for adjusting thread clearance and reducing wear.these bronze parts also allow screws to rotate smoothly and improve accuracy.
- The vertical column is very strong and stiff,which makes the machine very stable and improves accuracy of manufactured parts.
- The machine head is cast iron, it has been heat-treated,stress-relieved,
And precision machined.
- Machine gears are precision ground for smooth operation.
- Speeds can be easily changed.
- Tapping can be done in either rotation,working depth can be controlled by using a positive stop gauge.
- micro-feeding knob 2. Auto-feeding knob 3.feeding handle 4.crank 5.handwheel 6.cross lock screw 7. Longitudinal lock screw 8.lock handle 9.shift handle 10.switch 11.Guard
Specification
| Model | ZAY7032FG/1 | ZAY7040FG/1 | ZAY7045FG/1 | ||
| Max.drilling capacity | E32mm | E40mm | E45mm | ||
| Max.face mill capacity | E63mm | E80mm | |||
| Max.end mill capacity | E28mm | E32mm | |||
| Max.tapping capacity | M12 | ||||
| Max.spindle stroke | 130mm | ||||
| Headstock axial stroke | 400mm | ||||
| Swivel angle of headstock at perpendicular direction | ±90° | ||||
| Max.distance between spindle nose to table | 450mm | ||||
| Spindle taper | M.T.3 OR R8 | M.T.4 OR R8 | |||
| Distance between spindle to slide | 286mm | ||||
| Working area of table | 800mm×240mm | ||||
| Forward and backward travel of table | 175mm | ||||
| Left and right travel of table | 500mm | ||||
| Spindle speeds (4P) | 50HZ 80,145,260,375,710,1250 RPM | ||||
| 60HZ 95,175,310,450,850,1500 RPM | |||||
| Feed steps | 6 | ||||
| Feed range(mm/r) | 0.06, 0.09, 0.12, 0.15, 0.18, 0.30 | ||||
| Motor | 0.75KW (1HP) | 1.5KW (2HP) | 1.5KW (2HP) | ||
| Length | 820mm | ||||
| Width | 1160mm | ||||
| Overall height (without stand) | 1060mm | ||||
| Net weight/gross weight | 320kg/370kg | 323kg/373kg | 325kg/375kg | ||
Standrad accessories:Allen wrench, Wedge-Wrenches, Drill chuck arbor, screw, draw bar and washers
Optional accessories:
1.Machine stand
2.Power feed
3.90mm paraller vise
4.120mm paraller vise
5.Drill chuck
6.milling cuttter holder
7.Changing sleeve
8.Mill chuck
9.Auto-tapping electrical
10.Boring bar
11.Working lamp
12.Coolant system
13.DRO/XY
3.Machine photos
4.Manufacturing Capability
