Beschrijving
CMC 3A compact insulation busbar trunking system is used in AC 3 phase 4 lines or 3 phase 5 lines distribution system.
Product specification:
1. Current Rating: 400 A to 6300 A(CU) or 100A to 4000A(AL)
2. Ingress protection of IP54 or IP65
3. Insulation curent rating: [upto 1000 A]
4. Standard lengths of 4m/3m/2m/1m
5. System Voltage: AC380 /690V
6. Materiaal geleider: High conductivity Cu or AL
7. Halogen free, fire retardant Class-B-Epoxy insulation
8. Tap – off units are suitable for MCCBs or SDFs or MCBs
Product instroduction:
Busbar system for electrical distribution is an alternative to cumbersome conventional cable distribution system.
Decentralized distribution is the main highlight of this distribution system.
This system eliminates separate requirement of distribution & panel boards.
Loads can be fed from Plug-in Boxes unlike cables where each floor /machine is to be fed separately from the main switchboard.
Can be installed quickly with minimum technical expertise and have good asthetics.
Any section of bustrunking can be removed without distrurbing adjacent sections.
System is maintenance free and adds elegance to the surrounding.
Sandwich busway system main feature:
low reactance, low impedance, low voltage drop and low power loss.
Due to elimination of air there is no rise of chimney effect, so no fire barriers are required.
Due to compactness system can be installed in lesser space.
Automatic polarity is maintained during installation.
System can be mounted edgewise OR flat wise, horizontally or vertically in any direction with all kinds of bends and tees etc.
Flexible and safe distribution system leads to easy and fast installation.
System is completely re-usable.
Product specification:
1. Current Rating: 400 A to 6300 A(CU) or 100A to 4000A(AL)
2. Ingress protection of IP54 or IP65
3. Insulation curent rating: [upto 1000 A]
4. Standard lengths of 4m/3m/2m/1m
5. System Voltage: AC380 /690V
6. Materiaal geleider: High conductivity Cu or AL
7. Halogen free, fire retardant Class-B-Epoxy insulation
8. Tap – off units are suitable for MCCBs or SDFs or MCBs
Product instroduction:
Busbar system for electrical distribution is an alternative to cumbersome conventional cable distribution system.
Decentralized distribution is the main highlight of this distribution system.
This system eliminates separate requirement of distribution & panel boards.
Loads can be fed from Plug-in Boxes unlike cables where each floor /machine is to be fed separately from the main switchboard.
Can be installed quickly with minimum technical expertise and have good asthetics.
Any section of bustrunking can be removed without distrurbing adjacent sections.
System is maintenance free and adds elegance to the surrounding.
Sandwich busway system main feature:
low reactance, low impedance, low voltage drop and low power loss.
Due to elimination of air there is no rise of chimney effect, so no fire barriers are required.
Due to compactness system can be installed in lesser space.
Automatic polarity is maintained during installation.
System can be mounted edgewise OR flat wise, horizontally or vertically in any direction with all kinds of bends and tees etc.
Flexible and safe distribution system leads to easy and fast installation.
System is completely re-usable.
Picture
Technische parameters :
| S/N | Nominale stroom | Each Phase Copper Spec. layer*thickness(mm) |
Maat H*W(mm) |
Gewicht (kg/m) |
| 1 | 5000 | 3*175*6 | 630*170 | 165 |
| 2 | 4000 | 3*125*6 | 483*170 | 125 |
| 3 | 3150 | 2*140*6 | 362*170 | 90 |
| 4 | 2500 | 2*115*6 | 312*170 | 75 |
| 5 | 2000 | 175*6 | 231*170 | 55 |
| 6 | 1600 | 140*6 | 196*170 | 45 |
| 7 | 1250 | 100*6 | 156*170 | 35 |
| 8 | 1000 | 80*6 | 136*170 | 30 |
| 9 | 800 | 60*6 | 126*170 | 25 |
| 10 | 630 | 50*6 | 106*140 | 22 |
| 11 | 400 | 30*6 | 96*140 | 15 |
| 12 | 250 | 35*3 | 86*140 | 13 |
| 13 | 160 | 25*3 | 86*140 | 10 |
Main componnets:
Feeder Bustrunking
Plug-in Busbar trunking
Joint block
Horizontal Elbow
Horizontal Offset [Z] Elbow
Vertical Elbow
Vertical Offset [Z] Elbow
Vertical Tee Section
Standard Flange End
Flange End Box cum Termination Detail
MCCB Plug-in Boxes
Our stock
Order Notice:
1. material: copper or aluminum
2 current:
3 Phase
4 Hoeveelheid: ___m
5 Quantity of the elbows or knees,
6 Quantity of plug in unit
7 Plug in unit current
8 Sollicitatie
9 If drawings available, please send us the drawing for better quote.