Beschrijving
Excellent work, integral casting
The CNC Milling Machine fraiseuse base, bed, headbox, enz. are integrally cast, quenched and refined to ensure the stability and long-term reliability of the machine
Integral high-strength quenched castings
Using HT30O resin sand wear-resistant castings, high density, strong wear resistance,
The saddle adopts a double-layer casting structure, A “M”-shaped stiffener structure and a wide slope-shaped base
Foot design enhances the stability of the bed
Exquisite options and attention to detail :
High-speed spindle
Taiwan KERTURN/SANJET 10000 rpm spindle, stable and efficient 11/15KW
(Optional 12000 rpm spindle)
Taiwan HIWIN/PMI, roller guide, P grade linear guide, high precision, stable movement, suitable for high-speed mobile processing.
HIWIN/PMI ball screw. C3 grade ball screw, smooth running, small backlash
Electrical system
According to customer requirements, the system can be equipped with Mitsubishi/Fanuc), electrical components Schneider (standard high-power heat exchanger)
Spindle oil cooler device
Under the high-speed operation of the spindle, to reduce the temperature of the spindle and increase the service life of the spindle, it is recommended to use oil cooling for the 10,000-rpm spindle.
Pneumatic oil circuit assembly
The oil pump is equipped with Japan HERGO and pneumatic components as standard to ensure the lubrication of the oil circuit and the pneumatic pressure
Advanced control system
Normal configuration Japan Mitsubishi/Fanuc), (optional according to customer processing requirements
Different power motors)
Taiwan AIMACH robot tool magazine, 24 disc tool magazines, increase production efficiency.
Highly stable tool magazine
ATC cam box is detected by absolute encoder, with stable mechanism and high reliability
Inverter control, tool change speed will not change due to local power frequency
The speed of the tool change can be controlled by the program according to the demand
24T(30T)(optioneel)
Tool change time (T-T): 1.3 Sec.
High rigidity structure design
Fully enclosed cover sheet metal (including upper cover)
Beautiful rear cover design, liftable side windows, easy to clean crumbs
Smooth chip removal
Three-axis axial direct connection design
Direct drive design, no noise, backlash and vibration caused by belt or gear drive, improve processing efficiency and workpiece quality.
Three axes are directly driven by a servo motor to drive the ball screw without backlash, providing the efficiency of high-speed motion transmission and precise position control
| Machine details | |||
| Item | eenheid | Specifications | |
| System | Operating system | set | FANUC 0IMFβ10.4“ |
| Number of control servo axes | axis | 3 AXIS | |
| Worktable | Work table size | mm | 1200×650 |
| Work table load | kg | 800 | |
| T-slot of worktable (number-size×spacing) | mm | 5-18×120 | |
| Travel | Left and right stroke (X) | mm | 1100 |
| Back and forth stroke (Y) | mm | 650 | |
| Up and down stroke (Z) | mm | 600 | |
| Spindle | Spindle taper hole (specification/installation size) | mm | BT40 |
| Spindle speed | toerental | 10000toerental | |
| Spindle drive mode | Belt | ||
| Distance from spindle center to column guide rail (suitable for vertical machines) | mm | 690 | |
| Distance from spindle end surface to table surface | mm | 100-700 | |
| Guideway | X/Y/Z axis roller screw specifications | 4012/4012/4012 | |
| X-axis guide/line guide specification | Sliding roller guideway | ||
| Y-axis guide/line guide specification | Sliding roller guideway | ||
| Z-axis guide/line guide specification | Sliding roller guideway | ||
| Motor | X.Y.Z motor connection mode | Belt | |
| Spindle motor parameters (power) | kW | 11/15 | |
| X.Y.Z axis motor parameters (power) | kW | 3,3,3 | |
| Spindle cooler capacity (gear type/750) | 250 | ||
| Processing cooling pump horsepower | w | 450W | |
| Feed | X. Y. Z axis processing speed | m/min | 10,10,10 |
| X.Y.Z axis rapid feedrate moving speed | m/min | 36/36/24 | |
| Power requirement | kva | 20KVA | |
| Machine accuracy | positioning accuracy | mm | ±0.005/300 |
| Repeatability | mm | ±0.005/300 | |
| Machine specifications | Net weight of machine tool | T | 7.5T |
| Floor area of machine tool (length*width*height) | mm | 3350*2800*2900 | |
Verpakking :Standard export packing
Verzending : 45-60days after downpayment
1. Is it all right to make customer’s own brand name?
A: yes . we are available with OEM
2. Are you a manufactuer or trading company?
A:We are CNC machines manufacture located in mold city Dongguan city ,Guangdong province .
3. Can you do the design for us?
A: yes . if you want a different control system design or higher column , we are available .
4 . What is your terms of delivery?
A: FOB shenzhen . but we can negotiation other trade term.
5. What’s your payment term?
A: T/T OR L/C at sight .
6. When can I get the price?
A: you can send us inquiry by below contact.
7. Where is your company?
A: we are located in Donguan city ,Guangdong province , near shenzhen airport .Guangzhou Airport or Humen highway station.
8.Where is your loading port?
A: Shenzhen port . Guangdong province
9. Does your product have warranty service? How long is the warranty period?”
A: machine parts 1 year warranty . control system two years.