説明
Device description
Adopt modular integrated design, hammer crushing minimum particle size up to 30μm. Brushless DC motor drive and DC governor knob speed, speed range is wide (1000~15000r/ min), low speed torque is constant, long motor life, accurate installation and positioning, reliable; Easy to disassemble and clean.
The working principle of
Hammer crusher is mainly suitable for hammer grinding process, the working principle is high-speed rotation of the rotor with the blade, and the formation of high-speed relative movement between the precision small aperture screen, through the hammer edge and edge of the rotor will crush the material.
Process USES
Hammer crusher is especially suitable for crushing hard, crystalline and fibrous products as well as some products requiring very fine particles. It is the ideal equipment for processing bulk drug (API) particle size.
Technical characteristics
1.Flexible modular design, independent electrical control;
2.High speed, 高効率;
3.Material will not adhere to the shell, easy to clean;
4.According to the requirements can be waterproof, dustproof and explosion-proof options;
5.Suitable for the fine crushing of hard blocks, crystals or fiber materials;
6.Material in place detection, improve work continuity;
7.Uniform feeding device and hammer crushing equipment dust-free seal;
8.Rotor and screen can be quickly and conveniently disassembled;
9.Equipped with twin screw powder feeding mechanism, can realize uniform conveying of materials;
10.Quick assembly connection, convenient disassembly and cleaning;
11.Optional vacuum feeding, low labor intensity, high work efficiency;
12. Wide application range (30~150um), can crush a variety of materials with different properties;
13.The main shaft and crushing chamber triple seal (positive pressure seal, lip seal, synchronous dumping disk), can effectively prevent material pollution;
14. The control cabinet is completely sealed, the inlet and outlet air are forced fans, and the air inlet and outlet are equipped with H13 high efficiency filter to effectively prevent dust from entering the cabinet;
15.Water cooling channel interface adopts Staubli quick connector, one million times plug and plug life, socket with automatic closing cut-off, no gas or liquid leakage after unplugging, which is good forstableproduction.
Hammer mill -140(excluding powder feeding mechanism)
Hammer mill – with twin screw feeding mechanism
Hammer mill 280
Hammer mill system composition
Hammer mill – quantitative feeding mechanism
Hammer mill- Crushing system
Hammer crusher – Collection system
Hammer mill model
| model |
生産能力 (kg/h) |
The motor power (キロワット) |
Speed (r/min) |
Particle size (μm) |
| 140 | <60 Reference material: sucrose |
2.2 | 15000 | >30 |
| 210 | <300 Reference material: sucrose |
5.5 | 10000 | >30 |
| 280 |
<1200 Reference material: sucrose |
5.5 |
8000 | >30 |
| 420 | <2500 Reference material: sucrose |
7.5 | 6000 | >30 |
Multifunctional crushing and screening machine
Function of whole grain machine
Use
Mainly for wet granulation, spray granulation and other lumpy materials and tablets that do not meet the requirements, can be completed according to the size of the particle size requirements. It can also pulverize and recycle food and biscuits, as well as other coarse raw materials. It is the ideal equipment to deal with low viscosity block, gum, wet materials.
working principle
This machine makes use of the high-speed relative motion between rotor and screen to quickly roll the lumped material under the rotor, through the screen hole into granules, the finished particles are discharged instantly, with less heat, high efficiency and good quality.
Technical characteristics
Screening machine function
Use
The screen machine is equipped with a rotating screen, which is especially suitable for homogenizing granular materials and crushing fineness up to 150 um. The rotating screen cylinder can greatly benefit the machine.
The working principle of
The centrifugal force acting on the material will efficiently output the material from the sieve hole. Its compact and modular design makes it easy to integrate into almost any production line.
Technical characteristics
マルチ – function crushing and screening machine technical parameters
| project | unit | parameter | ||
|
Production capacity |
Kg/h |
crushing | <60(Refer to screen hole diameter φ1.0mm)(Reference material: sucrose) | |
| The whole grain | <250(Reference square hole screen: 10*10mm) | |||
| screening | <30(Reference mesh aperture: 20 メッシュ) | |||
| Twin screw powder feeding mechanism | <30(Reference material: lactose) | |||
|
Revolutions |
r/min |
crushing |
900~10000 | 900~15000 |
| The whole grain |
300~2000 | 900~2000 | ||
| screening |
300~3000 | 900~3000 | ||
| Twin screw powder feeding mechanism |
1~450 | |||
| Grain diameter | μm | crushing |
>50(10000 r) | |
| >30(15000 r) | ||||
| The whole grain |
>150 | |||
| The motor power | Kw | 2.2(220V50HZ) | ||
| The installed capacity | キロワット | 2.5 | ||