説明
12V lead-acid storage charger for motorcycle car fast charger battery charger
|
名前 |
12V lead-acid storage charger for motorcycle car fast charger battery charger |
|
モード |
SE1206A |
|
入力 |
110Vac or 220Vac |
|
出力 |
14.7V Float charge voltage:13.8V (for 12V lead acid battery) |
|
Output current |
6あ |
|
特徴: |
Temperature control compensation charger |
|
Compatibility |
60AH 80AH 90AH 120AH lead acid battery |
|
Protection |
-Short circuit protection -Overvoltage protection -Overcurrent protection -Overheating protection -Reverse connection protection |
|
申請先 |
Children’s toy cars, motorcycles, cars, 等. |
|
重さ |
450g |
Microprocessor Control (CPU).
3-STAGE AUTOMATIC CHARGING:
This is a fully automatic battery charger with 3 charge stages.
Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
3-stage chargers are suitable for most lead acid battery:Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
1:Input Characteristics:
Input Voltage: 100-240V AC
Input Frequency: 50Hzまたは60Hz and single phase.
Inrush Current (cold start):30あ [email protected]/60HZ/ 60A [email protected]/50HZ
Efficiency: ≥85.0% 230Vac/50Hz(Typical full load)
2:Output Characteristics:
Constant Charging Voltage: 14.7V Float charge 13.8V
C:Charging Mode Intelligent 12V 5-6A lead acid battery charger
3 Stages, CC, CV, Trickle
4:Safety Test for battery charger
Hi-pot Test:15KVac 5mA 3 Seconds between input and output test
Resistance:The liftpo4 battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds
Drop test: 高さ: The wheelchair battery chargerconform to BS EN60068-2-32:1993 TEST ED: free fall appendix B
5:Protection for battery charger
Over Voltage Protection:The power supply will be auto recovered when faults remove
Over Current Protection: Charger output current does not exceed the set maximum battery charging current.
Over Short Circuit Protection :Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)
Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start.
Our Service
1. OEM Manufacturing welcome: 製品, パッケージ,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
Q1. Can I have a sample order for battery charger?
あ: はい, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
あ: Sample needs 3-7 日, mass production time needs 15 に 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q3. Do you have any MOQ limit for charger order?
あ: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
あ: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-7 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for battery charger?
あ: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
