Descrizione
Stainless Steel/Carbon Steel Industrial Vibration/Vibrating/ Mill For Chinese Medicine/Herbs/Straw
FEATURES AND ADVANTAGES
- Available D50:2.5~150μm
- Suitable for grinding raw materials with Moh’s hardness below 9.
- Compared with ball mill, higher grinding efficiency, small occupation.
- Particle size can be adjustable by adjusting parameters such as grinding medium, amplitude, and frequency. The finer powder can be given in conjunction with classifier in series.
- Grinding media and liners can be made of special materials such as high manganese steel, high chromium steel, stainless steel, alumina, zirconia, quartz, ecc., which are wear resistant and less pollution.
- Air spring or rubber spring, instead of hard spring, long service life, good damping effect and low noise.
- Compact structure and small occupation.easy to disassemble and clean
- Lower installation power, wide application, high cost-performance.
- PLC control system, easy operation.
- Suitable for powder mixing, surface coating,mechanical chemical modification, eccetera.
- For heat sensitive and low melting materials, it can be crushed by water cooling or strong cooling.
- Finer powder can be given if to be used with classifier.
- Explosion-proof design can be selected to meet the requirements of ultra-fine grinding processing of flammable and explosive oxide materials.
WORKING PRINCIPLE
With the high-speed vibrator or vibration motor, the grinding media (pins, cylpebs or balls) would vibrate in high frequency, high-speed rotating and slow revolving, which would impact, rub and shear materials around them and make them into fine powder and mix them evenly.
Technical Parameters
| Medium and small Amplitude Vibration Mill Technical Parameter | |||||||
| Parametro | MZ10 | MZ30 | MZ50 | MZ100 | MZ200 | MZ300 | MZ500 |
| Chamber Volume(L) | 10 | 30 | 50 | 100 | 200 | 300 | 500 |
| Input Particle Size (mm) | 5 | 5 | 5 | 10 | 10 | 10 | 10 |
| Produce Size (uno) | 10-150 | 10-150 | 10-150 | 10-150 | 10-150 | 10-150 | 10-150 |
| Capacità produttiva (kg/h) | 1-5 | 5-20 | 10-50 | 20-150 | 50-300 | 100-500 | 150-800 |
| Power (KW) |
0.75 | 1.5 | 2.2 | 3.7 | 7.5 | 11 | 15 |
| Big Amplitude Vibration Mill Technical Parameter | ||||||||
| Parametro | MZ100 | MZ300 | MZ500 | MZ600 | MZ800 | MZ1000 | MZ1200 | MZ2000 |
| Chamber Volume(L) | 100 | 300 | 500 | 600 | 800 | 1000 | 1200 | 2000 |
| Input Particle Size (mm) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Produce Size (uno) | 10-150 | 10-150 | 10-150 | 10-150 | 10-150 | 10-150 | 10-150 | 10-150 |
| Capacità produttiva (kg/h) | 100-200 | 200-300 | 300-600 | 400-800 | 500-1000 | 800-1500 | 1000-1800 | 2000-3000 |
| Power (KW) |
15 | 45 | 55 | 75 | 90 | 110 | 150 | 220 |
Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.
Related Engineering Case
WHO CHOOSE US
Q: What service do you supply?
UN: 1). We offer consultancy for project feasibility assessment, process flow definition, preliminary layout and factory building plan, project budget, project time schedule, eccetera.
2). We supply sample processing tests in our test station where are equipped with our various machine products, to help clients compare performances of different types of machines or process.
3). We supply project engineering, automation engineering and civil engineering.
4). We send engineers to the clients’ project site and offer on-site technical instruction and supervision during the machine installation, commissioning and test run.
Q:How can I trust on your quality?
UN: 1). All of the machine be tested successfully in Weifang workshop before shipment.
2). We supply one year warranty for all equipment and lifelong after-sales service.
3). We can test your material in our equipment before place the order, to ensure our equipment is suitable for your project.
4). Our engineers will go to your factory to install and debug the equipment, they will not be back until these equipment can produce qualified products.
Q:Does your company provide Engineers Abroad Service?
UN: Sure, we provide it. And we can provide free training for on-site workers.
Q:How to train our staff about operation and maintenance?
UN: We will provide detailed technical instructive pictures to teach them for the operation and maintenance. Inoltre, our engineers for guide assembly will teach your staff on site.