Descrizione
Roller Type Shot Blasting Machine(Q69)
The Q69 series roller type shot blasting machine is pass-through shot blasting machine used for the cleaning of steel plate, steel structure and profile. This kind of shot blasting machine can not only remove the scale and dust during welding, but also can enhance workpieces fatigue resistance, reaching the purpose of improving the inner and surface quality of steel plate
H beam shot blasting machine:
Shot blasting machine for h beam is designed and produced by adopting the advantages of similar products from both within the country and abroad. The rusting cleaning part (shot blasting) adopts high-efficient blast wheel and full shutter type shot sand separator. The sweeping machine adopts specially made high-strength nylon rolling brush and high-pressure ventilator. The preheating and drying part of shot blasting machine may adopt various heating methods. The paint spraying part adopts high-pressure airless spraying method. The complete set of equipment is controlled by PLC, and is the large-size complete equipment of international advanced.
QH69 shot blasting machine is mainly used for surface treatment (namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts.
Technical parameter
| Technical parameter of pass-through type shot blasting machine Q69 | |||||||||
| NO. | Modello Articolo |
Q698 | Q6912 | Q6915 | Q6920 | Q6925 | Q6930 | Q6940 | |
| 1 | Width of workpiece | mm | 800 | 1200 | 1500 | 2000 | 2500 | 3000 | 4000 |
| 2 | Size of inlet opening | mm | 800* 1600 |
1200* 400 |
1500* 400 |
2000* 400 |
2500*800 | 3000*800 | 4000*400 |
| 3 | Length of workpiece | mm | 1200- 12000 |
1200- 6000 |
1200- 12000 |
1200- 12000 |
3000-12000 | 2400-12000 | 4500-18000 |
| 4 | Roller speed | m/min | 0.5-4 | 0.5-4 | 0.5-5 | 0.5-4 | 0.5-4.5 | 0.5-4 | 2-8 |
| 5 | Thickness of plate | mm | 3-60 | 3-60 | 1.5-60 | 3-60 | 3-60 | 3-110 | 4.5-110 |
| 6 | Abrasive flow rate | kg/min | 8*120 | 4*250 | 4*250 | 6*250 | 6*250 | 6*360 | 8*360 |
| 7 | Abrasive initial fill | kg | 4000 | 4000 | 4000 | 4500 | 4500 | 8000 | 11000 |
| 8 | Adjusting height of rolling brush | mm | 400 | 200 | 350 | 450 | 600 | 850 | 900 |
| 9 | Ventilation capacity | m3/h | 22000 | 17560 | 19000 | 19550 | 27758 | 28050 | 38000 |
| 10 | Total power of shot blast machine (no dust collector) |
kw | 90 | 78.3 | 113.6 | 156.6 | 224.55 | 204.8 | 293.6 |
FAQ
Q 1: Do you have after-sale service?
UN: sì, we have perfect after-sale service
Q 2: How long can your spare parts be used?
UN: Blade, control cage and distributor are high chrome, and can be used for more than 2000 ore.
Kinds of guard board can be used for more than 3000 ore.
Q 3: Where is your factory?
UN: We are near QINGDAO Airport, you are welcome to be QINGDAOAirport and then we will arrange car to pick you up there. Sincerely welcome here to investigate our factory in person.
Q 4. How about your company?
UN: Our company is the biggest manufacturer of metal abrasive and shot blasting machine in china, we have exported to more than 30 counries and regions, and got good comments from overseas and domestic.
