Descrizione
Everexceed 110V100A Uxcel Series Industrial Battery Charger with High Frequency Rectifier /DC UPS
The EverExceed uXcel range industrial battery charger is the flagship charger of EverExceed Industrial Power solutions. It integrates proven design topology with the latest advanced digital control technology to control the thyristor bridge rectifier and provides the most reliable and trouble-free performance in any electrical and industrial environments.
Key features:
>Flexible maintenance and Reduced MTTR-The design make it easy for front-access to all vital modules modules of the charger
>Versatile constant voltage and constant current charging modes
>Smart communication and Remote Monitoring through isolated RS232, RS485, Ethernet. Full data logging
>Long design life up to 20+years-system design life up to 20+ years in continuous operation under the condition of appropriate maintenance
>Enhanced Robustness – Mechanical design to withstand vertical and horizontal acceleration stress up to 0.5g as standard
Recent projects:
Technical specifications:
| Tensione nominale | 12V | 24V | 48V | 110V | 220V | 400V |
| Nominal Current | 25-1500UN | 25-1500UN | 25-1500UN | 16-1500UN | 16-1500UN | 16-1000UN |
| Input Supply | Single phase 120V/220V/230V/240V, three phase 208V/380V/400V/415V/480V | |||||
| Input Voltage/Frequency Tolerance | ± 10% , 50/60Hz ± 5% | |||||
| Tensione di uscita | 1.8-18V | 3.6-36V | 7.2-72V | 16.5-165V | 33-330V | 60-600V |
| Voltage Ripple | <2% specified full load and without battery connected. | |||||
| Static Voltage Regulation | ± 1% for 0-100% load variation, ± 10% AC input voltage variation and 5% AC input frequency variation | |||||
| Dynamic Voltage | 5% for load variation of 10% A 100% or 100% A 10% | |||||
| Current Regulation | ± 1% | |||||
| Protection | Input Circuit Breaker, Charger Output Fuse/Circuit Breaker*, Charger Current | |||||
|
Limit, Dual Battery Current Limit, AC Surge Suppression*, Protezione da cortocircuito, Reverse Battery Polarity Protection, Phase lost protection*
|
||||||
| Alarms | Charger Fail, DC High, Under/Over Voltage Trip, Earth Fault*, Low Electrolyte,Battery Disconnected*, Battery Over Temperature*, Blown Fuse*, Common Alarm Relay, Common Alarm Buzzer( All alarms are user programmable ) | |||||
| Metering | Charger Voltage, Charger Current, Load Voltage, Load Current, Battery Charge/Discharge Current, Battery Temperature*, Battery Capacity Ratio( Meter accuracy 1% ) | |||||
| Options | DC Voltage Regulator, TCP/IP adaptor, Triphase control and shot , Cabinet lamp, Temperature and humidity controller, DC distribution board | |||||
| Physical | Wall mount or free standing powder coated metal cabinet ( Dimensions depend on charger output rating and associated battery requirements ) | |||||
| Environmental | -10 to 50ºC, up to 95% humidity | |||||
| Operating Altitude (M) | 3000 (with out derating) | |||||
| Communication Interface | RS232/RS485 Modbus, TCP/IP Ethernet (opzionale) | |||||
| DC Meter Display (Optional) | For display the voltage and current of charger on the panel | |||||
| MTBF / MTTR | 100,000 Hours / 4 Hours | |||||
| Efficienza | 80 A 93% depending on nominal voltage and power rating | |||||
| Temperature Compensation* | Programmable 3 – 6 mV / Cell / °C | |||||
| Audible Noise | <60 Db | |||||
| Limp Home Feature | Continuous operation in the event of control failure | |||||
| Revert to Factory Settings | Reinstates all original factory settings | |||||
| System | SCR full-bridge, Intelligence charging management, Fast acting fuse | |||||
FAQ:
Q1: Are your factory or trading company?
UN: We are professional battery manufacturer with our own factory and brand. We provide all kinds of OEM/ODM services for clients, can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2.Can I have a sample order?
UN: sì, we welcome sample order to test and check quality.
Q3: Where can I get the price?
UN: We will offer you the best quotation in 12 hours after we get the product specifications such as voltage capacity application etc.
Q4. What is your terms of payment?
UN: T/T 30% as deposit, E 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q5. How about your delivery time?
UN:Generally, it will take 15-30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q6. Do you test all your goods before delivery?
UN: sì, We have professional QC team to make sure that the product in good condition before send out the goods.
Q7: How do you make our business long-term and good relationship?
UN:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.