Commercial Kitchen Equipment Table Top Gas Stove

1.Stainless steel construction luxurious and beautiful
2.High-efficiency and energy saving, easy to clean
3.Lighter ignition, with ignition flame, flame failure saftery device for each control
4.Key-component from famous supplier, according to the Euro standard

1.Check whether the stove surface is clean. After confirming that there is no sundries on the stove surface, place the pot on the stove flower.
2.Connect the liquefied petroleum gas source, and check whether it is firmly connected before operation;

3. Press the air valve knob in front of the furnace axially and rotate it at a certain Angle. At the same time, use the other hand to fire the torch, and light the fire beside the burners.

4. After the fire is lit, continue to hold the knob of the air valve for about 15 seconds, and then let go. At this time, the air valve heates the fire head through the fire, and the safety device is in the open state.

5. When the ignition point is on fire, turn the air valve knob counterclockwise to turn the fire to the strongest, and continue to turn counterclockwise to the extreme position to turn the fire from strong to the weakest. If you want to close the air valve, turn the knob clockwise to the end point.At this time can be heard “tap” sound, the air valve is closed.

6.Cleaning and Maintenance

7.When cleaning and maintenance, the furnace valve should be closed to prevent accidents;

8.After work every day, remove the pot in time, and then rinse with water;

9.Then wipe the furnace body and furnace flower with a wet towel. It is strictly prohibited to wash the surface of the furnace body directly with water, so as not to damage the equipment performance.

10.After cleaning, put all the accessories in place and cover the furnace body with dustproof paper

Q1: How long is your Warranty?
A1: All our products come with a standard one year warranty on vulnerable parts. As well, we will provide 1% quantity Vulnerable parts along with the container.

Q2: What is your payment method?
A2: T/T (30% deposit, 70% balance before shipment), Unione occidentale, Money Gram, DP, LC.

Q3: What is your MOQ?
A3: Accept sample order or test order. General order :1*20GP or 40GP, 40HQ mixed container.

Q4: What is your Trade Terms?
A4: Full container, FOB Guangzhou or Shenzhen.
Less than full container, 10% price higher, EXW factory or send to your warehouse in
Guangzhou.

Q5: Are you a trading company or Factory?
A5: sì, we are manufacturer, our factory located in BaiYun district, 20 minutes far from the airport.
good quality products, best reasonable price, warm and Intimate service. All these are important for a buyer to find a reliable supplier in China!

Q6:How long is your lead time (What is your delivery time) ?
A6: Full container: 30 days after receiving deposit.
LFC container: 7~25 days depends on quantity.

D7: Do you offer samples available?
A7: sì, we can provide sample, but the cost of the sample is paid by the customer, if you feel satisfied and have the next mass production order, we can deduct the cost of the sample.

Q8: Do you accept OEM?
A8: sì, we can help make and put your logo on the machine.
If you want our FOODSENSE logo, also ok.

Miss Hannah


Instagram: foodsense01

Face Book:Foodsense Hannah