Descrizione
WD-1001M-DIN(T/T4/V3/S/D)
Brief introduction
DIN rail industrial PLC Ethernet bridge is a powerline telecommunication product which developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspects just as railway, mines, industrial telecommunication and metro etc…
1.1 Highlight
1.1.1 Technical parameters
Support G.hn.
Industrial DIN rail style installation.
Actual bandwidth up to 400Mbps.
The maximum transfer distance up to 1000 meters.
Self-adapt the rate.
Compatible with all G.hn devices.
One Domain Master can manage 15pcs End Point.
There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit.
1.1.2 Manageability
Support Remote Firmware update(TR069).
802.3D Ethernet Bridge.
802.1Q VLAN.
Quality of Service(QoS).
IGMO(IPv4)Snooping&MLD(IPv6)Snooping.
Support local web management.
1.1.3Operating environment
Temperatura di lavoro: -40ºC-80ºC.
Operating humidity: 10%-85% no condense.
Storage humidity:5%-90% no condense.
1.1.4 Design standards
ITU-T G.9960
IEC 60529
IEC 50022
IEC 60068-2-6
MIL-STD-810G
Specifica:
|
Modello |
WD-1001M-DIN(T/T4/V3/S) |
WD-1001M-DIN(D) |
|
Interfaccia |
1*LAN 10/100/1000Base-TX self adaption RJ45, |
1*LAN 10/100/1000Base-TX self adaption RJ45, |
|
LED display light |
Ethernet, PLC link ,power |
|
|
Transfer band |
25,50 and 100MHz and MIMO (based on G.9963) |
|
|
Protocol(PHY) |
IEEE802.3,IEEE802.3x, IEEE802.3u G.Hn |
|
|
Security |
128-AES |
|
|
Transfer rate(PHY) |
800Mbps |
|
|
Modulation |
OFDM |
|
|
Effective transfer rate |
TCP/IP 400Mbps |
|
|
Manageability |
Remote Firmware update,support TR-069(opzionale) |
|
|
802.1D Ethernet Bridge |
||
|
802.1Q VLAN |
||
|
Quality of Service(QoS) |
||
|
IGMO(IPv4)Snooping&MLD(IPv6)Snooping |
||
|
Temperatura operativa |
-40ºC-80ºC |
|
|
Misurare |
67*160*123 (mm)(L×W×H) |
|
|
Peso |
0.35kg |
0.30kg |
|
Operating environment |
Operating humidity:10%-85% (no condense) |
|
|
Storage humidity: 5%-90%(no condense) |
||
|
Certificazione |
FCC,CE class B,WEEE,RoHS |
|
1.2 Caratteristiche
(1) Packet loss:≤0.1%(100M,load 70%).
(2) Supporto 7*24 hours all weather operation.
(3) Hardware watch dog function.
(4) PING≤2MS.
(5) The quantity of the group ≤16pcs.
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;
Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s.
According to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared:
Between the power supply voltage port and ground: ±2.0kV;
Between signal circuit and ground: ±1.0kV;
Repetition frequency: 5KHz;
Test duration: 1 min/ time;
Testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
1.7 System topology
WD-1001M-DIN(T)
WD-1001M-DIN(T4)
WD-1001M-DIN(V3)
WD-1001M-DIN(S)
WD-1001M-DIN(D)
Product model selection:
|
Modello |
Ethernet Port |
Line Environment |
Network Structure |
|
WD-1001M-DIN-T |
1 |
AC(3 phases+N) |
Network access points must be connected in 3 phases, and terminals can be mixed in 3 phases and 1 phase |
|
WD-1001M-DIN-T4 |
1 |
AC(3 phases+N) |
Network access points and terminals require uniform standard connections (85-520V) |
|
WD-1001M-DIN-V3 |
1 |
AC(3 phases) |
Only three phase connection, and according to the unified standard wiring (85-520V) |
|
WD-1001M-DIN-S |
1 |
AC(phase + null + ground) |
Single phase with ground (85-520V) |
|
WD-1001M-DIN-D01 |
1 |
DC |
9-36V |
|
WD-1001M-DIN-D02 |
1 |
DC |
18-75V |
|
WD-1001M-DIN-D03 |
1 |
DC |
100-700V |
