תיאור
Hangzhou Dejia Electronics has passed ISO9001:2008 Quality System Certification, UL and TS16949 Certification, ISO14001 Environment Certification while our products meet RoHS Directive. We operate under ISO9001:2008 Quality System Certification strictly integrating fine management into every production step to ensure our product quality ahead of others in this field.
Our company manufacture massively by mature technology products as follows: streetlight aluminum PCB, fluorescent lamp aluminum PCB, wash wall light aluminum PCB, spotlight aluminum PCB, bulb light aluminum PCB, tunnel lamp aluminum PCB and other aluminum PCBs. So far our business has reached over ten provinces and cities in China; abroad we have clients from America, England, גֶרמָנִיָה, Turkey, Malaysia, Russia, Japan, Brazil and many other countries.
In June 2012, our company took the first place to bring out 3D bending aluminum PCB widely used in LED lighting, car lamp, backlight and such areas bringing new revolution. The main consumers of 3D bending aluminum PCB were CREE, GE, Volkswagen, Audi, BOE, Topstar, ETi and such famous enterprises at home and abroad.
Nowadays materials used by our company are from Microtek, Juding, Quanbao, Dupon, Beggs and such high-end materials able to manufacture products with coefficient of heat conductivity from 0.5W to 4.0W and to satisfy clients’ needs both at home and abroad.
Our company manufacture massively by mature technology products as follows: streetlight aluminum PCB, fluorescent lamp aluminum PCB, wash wall light aluminum PCB, spotlight aluminum PCB, bulb light aluminum PCB, tunnel lamp aluminum PCB and other aluminum PCBs. So far our business has reached over ten provinces and cities in China; abroad we have clients from America, England, גֶרמָנִיָה, Turkey, Malaysia, Russia, Japan, Brazil and many other countries.
In June 2012, our company took the first place to bring out 3D bending aluminum PCB widely used in LED lighting, car lamp, backlight and such areas bringing new revolution. The main consumers of 3D bending aluminum PCB were CREE, GE, Volkswagen, Audi, BOE, Topstar, ETi and such famous enterprises at home and abroad.
Nowadays materials used by our company are from Microtek, Juding, Quanbao, Dupon, Beggs and such high-end materials able to manufacture products with coefficient of heat conductivity from 0.5W to 4.0W and to satisfy clients’ needs both at home and abroad.
Alu-PCB(MCPCB)Capability
| לֹא. | פָּרִיט | Capabilities |
| 1 | Layers | 1-2 Layers |
| 2 | Finished Thickness | 16-134Mil (0.4MM-3.4MM ) |
| 3 | מקסימום. מֵמַד | 500MM *1200MM |
| 4 | חוֹמֶר | TCB-2AL,CS-AL-88/89,EM-MP,HA80,NRK,JHAF02-1.0,3D Bending,Copper base,DJ-A11 |
| 5 | Finished Thickness Tolerance | ≤1.0MM ±0.10MM -1.6MM ±0.15MM |
| 6 | Min.Line Width&Spacing | 4Mil (0.1MM ) |
| 7 | Copper Thickness | 35um, 70um,1 to 10oZ |
| 8 | Min. Finished Hole Size | 0.95MM |
| 9 | Min. Drill Size | 1.00MM |
| 10 | מקסימום. Drill Size | 6.5MM |
| 11 | Finished Hole Size Tolerance | ±0.050MM |
| 12 | Aperture Position Precision | ±0.076MM |
| 13 | Warp & Twist | 0.75% |
| 14 | Min SMT PAD Size | 0.4MM±0.1MM |
| 15 | Min.Solder Mask PAD | 0.05MM(2Mil) |
| 16 | Min.Solder Mask לְכַסוֹת | 0.05MM(2Mil) |
| 17 | Solder mask Thickness | >12um |
| 18 | Min.Solder Mask Bridge | 0.1MM(4Mil) |
| 19 | Surface Finishing | HAL, HALLeadfree,OSP, Immersion Gold, וכו |
| 20 | HAL Thickness | 5-12um |
| 21 | Immersion Gold Thickness | 1-3 Microinch |
| 22 | OSP Film Thickness | ENTEK PLUS HT:0.3-0.5um; F2:0.15-0.3um |
| 23 | V-CUT Angle | 30°,45°,60° |
| 24 | V-CUT Thickness | 0.4-3.4MM |
| 25 | V-CUT Precision | ±0.05MM, Up&Down Cut Deviation ±0.05MM,Residual Thickness ±0.05MM |
| 26 | Outline Finishing | Routing & Punching; Precision Deviation ±0.10MM |
| 27 | E-test Voltage | 250 ± 5V |
| 28 | E-test Resistance | 10Ω-100MΩ |
| 29 | Peel Strength | 288°, 30s ≥1.4 |
| 30 | Thermal Conductivity | 1.0 to 12W/m.k |
| 31 | Withstand Voltage | AC:1KV אֶל 6.5KV, DC:1KV אֶל 8.5KV |
| 32 | Thermal Stress | 288°,30s Non-Layered No Foaming |
