Modular Integrated Design Hammermill - רכזת ספקים OEM7

תיאור

Hammer mill – Product introduction

Device description
Adopt modular integrated design, hammer crushing minimum particle size up to 30μמ. Brushless DC motor drive and DC governor knob speed, speed range is wide (1000~15000r/ min), low speed torque is constant, long motor life, accurate installation and positioning, reliable; Easy to disassemble and clean.

The working principle of
Hammer crusher is mainly suitable for hammer grinding process, the working principle is high-speed rotation of the rotor with the blade, and the formation of high-speed relative movement between the precision small aperture screen, through the hammer edge and edge of the rotor will crush the material.

Process USES
Hammer crusher is especially suitable for crushing hard, crystalline and fibrous products as well as some products requiring very fine particles. It is the ideal equipment for processing bulk drug (API) particle size.

Technical characteristics
1.Flexible modular design, independent electrical control;
2.High speed, high efficiency;
3.Material will not adhere to the shell, easy to clean;
4.According to the requirements can be waterproof, dustproof and explosion-proof options;
5.Suitable for the fine crushing of hard blocks, crystals or fiber materials;
6.Material in place detection, improve work continuity;
7.Uniform feeding device and hammer crushing equipment dust-free seal;
8.Rotor and screen can be quickly and conveniently disassembled;
9.Equipped with twin screw powder feeding mechanism, can realize uniform conveying of materials;
10.Quick assembly connection, convenient disassembly and cleaning;
11.Optional vacuum feeding, low labor intensity, high work efficiency;
12. Wide application range (30~150um), can crush a variety of materials with different properties;
13.The main shaft and crushing chamber triple seal (positive pressure seal, lip seal, synchronous dumping disk), can effectively prevent material pollution;
14. The control cabinet is completely sealed, the inlet and outlet air are forced fans, and the air inlet and outlet are equipped with H13 high efficiency filter to effectively prevent dust from entering the cabinet;
15.Water cooling channel interface adopts Staubli quick connector, one million times plug and plug life, socket with automatic closing cut-off, no gas or liquid leakage after unplugging, which is good forstableproduction.

Hammer mill -140(excluding powder feeding mechanism)

Hammer mill – with twin screw feeding mechanism

Hammer mill 280

Hammer mill system composition

Hammer mill – quantitative feeding mechanism

Hammer mill- Crushing system

Hammer crusher – Collection system

Hammer mill model

model	Production capacity (kg/h)	The motor power (kw)	Speed (r/min)	Particle size (μמ)
140	<60 Reference material: sucrose	2.2	15000	>30
210	<300 Reference material: sucrose	5.5	10000	>30
280	<1200 Reference material: sucrose	5.5	8000	>30
420	<2500 Reference material: sucrose	7.5	6000	>30

Multifunctional crushing and screening machine
Function of whole grain machine

Use
Mainly for wet granulation, spray granulation and other lumpy materials and tablets that do not meet the requirements, can be completed according to the size of the particle size requirements. It can also pulverize and recycle food and biscuits, as well as other coarse raw materials. It is the ideal equipment to deal with low viscosity block, gum, wet materials.

working principle
This machine makes use of the high-speed relative motion between rotor and screen to quickly roll the lumped material under the rotor, through the screen hole into granules, the finished particles are discharged instantly, with less heat, high efficiency and good quality.

Technical characteristics

1.It is applicable to the whole grain of material ≥20g in each batch.

2. Adopt modularized design, can realize dry and wet granulator by replacing granulator knife and screen; Sealed bin can be equipped to reduce dust leakage.

3.Three types of granulator knives can be used for granulator of various materials with different properties.

4. The screen opening is small to 0.4mm, the opening rate is high, no dead Angle; Fine particle size, high material passing rate, can effectively reduce the occurrence of material heating phenomenon, easy to clean

5.High precision of mesh aperture, precise control of the gap between the knife and screen, precise control of the particle size distribution of the material after the grain.

6.Self-designed right-angle transmission system and shaft sealing technology reduce the risk of material pollution.

7.The whole working cavity smooth transition without dead Angle, smooth material, low residual high yield

8.The whole machine adopts quick mounting clamp connection, easy disassembly and installation, easy to master.

Screening machine function
Use
The screen machine is equipped with a rotating screen, which is especially suitable for homogenizing granular materials and crushing fineness up to 150 um. The rotating screen cylinder can greatly benefit the machine.

The working principle of
The centrifugal force acting on the material will efficiently output the material from the sieve hole. Its compact and modular design makes it easy to integrate into almost any production line.

Technical characteristics

1.Suitable for screening material ≥20g per lot.

2.Suitable for crushing all kinds of dry, wet and sensitive materials.

3.It can be used individually or integrated into a complete production line.

4.Modular design increases production flexibility and can change the nose in 2 minutes.

5.The wide selection and rapid replacement of components make the equipment more versatile.

6.Low energy consumption, reduce material heat generation.

Multi – function crushing and screening machine technical parameters

project	יחידה	parameter
Production capacity	Kg/h	crushing	<60(Refer to screen hole diameter φ1.0מ"מ)(Reference material: sucrose)
		The whole grain	<250(Reference square hole screen: 10*10מ"מ)
		screening	<30(Reference mesh aperture: 20 mesh)
		Twin screw powder feeding mechanism	<30(Reference material: lactose)
Revolutions	r/min	crushing	900~10000	900~15000
		The whole grain	300~2000	900~2000
		screening	300~3000	900~3000
		Twin screw powder feeding mechanism	1~450
Grain diameter	μמ	crushing	>50(10000 r)
			>30(15000 r)
		The whole grain	>150
The motor power	Kw	2.2(220V50HZ)
The installed capacity	kw	2.5