La description
Upgraded Version Remote Control Lawn Mower Cordless Lawn Mower Mini Robot Lawn Mower With Parts Prices 
The intelligent lawn mower can complete the work of mowing the lawn independently, without direct human control and operation, and has low power, low noise, exquisite and beautiful appearance, and greatly reduces manual operation.
The intelligent lawn mower is suitable for clearing all kinds of weeds such as reeds, alfalfa, fish grass and other large and small plots of plains, hills, terraces, orchards, and triangles, with simple operation and high work efficiency. We usually use lawn mowers for school and street beautification. In foreign countries, many families have lawn mowers for weeding their gardens.
Parameter
| Modèle | KB750-8A |
| Dimensions | 930*860*580millimètre |
| Taille du paquet | 1060*960*810millimètre |
| Total Weight | 130kg |
| Cutting Width | 550millimètre |
| Height Adjustment | 10-150millimètre |
| Cutting Height | 20-150millimètre |
| Walking Speed | 0-6km/h |
| Gradeability | 0-30° |
| Min. ground Clearance | 20millimètre |
| Operation Method | Remote control walking, remote control cutter head lifting |
| Way Of Walking | Tracked self-propelled |
| Engine Brand | LONCIN Vertical axis four stroke |
| Pouvoir | 7.5hp |
Remote Control La description
Operating instructions of lawn mower
1. Preparation before starting the remote control mower
(1)Be sure to confirm the tightness of screws of all parts before starting up.
(2)Turn on the machine power key switch, pull back the right control lever and hold it, then press the switch key of the remote
controller to turn on the remote controller.
(3)When the remote control is turned on, a “drip” will appear, indicating that the machine matches the remote control normally.
(4)engine start;
a,Release the brake on the right side of the engine (also disconnect the flameout switch);
b,Turn the left throttle counterclockwise to the end (so as to open the engine throttle at the same time);
c,Pull hard on the pull rope of the hand pull plate to start the engine;
d,Adjust the throttle to the proper speed in time after starting the engine;
e,Operate the remote control to cut grass.
2. Remote control description:
D/R switch (large and small rudder): adjust the walking speed of the machine (the factory default is high speed gear) The left joystick controls the machine to walk forward and backward, and the right joystick controls left and right turns
5 Channel (two-stage switch):The cutter head rises and falls to adjust the cutting height of the cutter head.
Rudder fine adjustment (left-right adjustment): When adjusting the walking speed of the machine, the electronic adjustment in the machine will make a “drip” sound. Only then can the “Rudder fine adjustment” button be used until the electronic adjustment in the machine does not make a sound.
Throttle fine adjustment (up and down adjustment): the same principle as the “rudder fine adjustment” button.
Power switch: push up to turn on the remote control, and pull down to turn off the remote control.
(2)Turn on the machine power key switch, pull back the right control lever and hold it, then press the switch key of the remote
controller to turn on the remote controller.
(3)When the remote control is turned on, a “drip” will appear, indicating that the machine matches the remote control normally.
(4)engine start;
a,Release the brake on the right side of the engine (also disconnect the flameout switch);
b,Turn the left throttle counterclockwise to the end (so as to open the engine throttle at the same time);
c,Pull hard on the pull rope of the hand pull plate to start the engine;
d,Adjust the throttle to the proper speed in time after starting the engine;
e,Operate the remote control to cut grass.
2. Remote control description:
D/R switch (large and small rudder): adjust the walking speed of the machine (the factory default is high speed gear) The left joystick controls the machine to walk forward and backward, and the right joystick controls left and right turns
5 Channel (two-stage switch):The cutter head rises and falls to adjust the cutting height of the cutter head.
Rudder fine adjustment (left-right adjustment): When adjusting the walking speed of the machine, the electronic adjustment in the machine will make a “drip” sound. Only then can the “Rudder fine adjustment” button be used until the electronic adjustment in the machine does not make a sound.
Throttle fine adjustment (up and down adjustment): the same principle as the “rudder fine adjustment” button.
Power switch: push up to turn on the remote control, and pull down to turn off the remote control.
