La description
High quality Natural gas / Biogas / Coal Bed Gas /LPG Genset from 30 KW to 1000KW.
N'hésitez pas à nous contacter
N'hésitez pas à nous contacter
30kW Natural Gas Genset
Recommended Operation Conditions
1. CH4 Content of Gas ≥76%
2. Calorific Value ≥ 32 MJ/m³
3. H2S Content of Gas ≤ 20 mg/m³
4. Total Sulphur Content of Gas ≤ 460 mg/m³
5. -25ºC ≤ Ambient Temperature ≤ +50ºC
Advantages & Features
1. Excellent power generation efficiency of our 30kW natural gas generator
2. Adaptable for a wide range of gas pressure
3. Reliable manual control model of gas powered gensets
spécification & Configuration
| 30kW Natural Gas Genset | |
| Modèle | ZJ30GF4-PN |
| Prime Power | 30 kW (37.5 kVA) |
| Tension nominale | 230/400V |
| Courant nominal | 54.1UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.32 Nm³/kWh |
| Masse | 780 kgs |
| Overall Size (L × W × H) | 1,720 × 820 × 1,250 millimètre |
| Engine | |
| Marque | Dongfeng |
| Modèle | NQ100N |
| Taper | 4-cylinder, 4-stroke, naturally aspirated |
| Displacement | 3.759 L |
| Compression Ratio | 10.5 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Equivalent combustion, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 35% |
| Alternator | |
| Marque | Faraday |
| Modèle | FD2C1-4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 87.5% |
| Manette | |
| Marque | HARSEN |
| Modèle | GU641B |
| Taper | Manual control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
50kW Natural Gas Powered Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥76% |
| 2. Gas Pressure ≥3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable CMS engine, Mecc Altea alternator and DEIF controller |
| 2. Prompt dynamic response similar to diesel genset |
| 3. Excellent power generation efficiency of natural gas fueled generator set |
| 4. This 50kW natural gas powered genset is adaptable for a wide range of gas pressure |
| 5. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 50kW Natural Gas Powered Genset | |
| Modèle | ZJ50GF4-PN |
| Prime Power | 50 kW (62.5 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 90.2 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.32 Nm³/kWh |
| Masse | 1,000 kgs |
| Overall Size (L × W × H) | 2,170 × 900 × 1,400 millimètre |
| Engine | |
| Marque | CMS |
| Modèle | 6B |
| Taper | 6-cylinder, 4-stroke, naturally aspirated |
| Displacement | 5.9L |
| Compression Ratio | 10.5 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Equivalent combustion, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 38% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO32-3L/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 90.8% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
90kW Natural Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥76% |
| 2. Gas Pressure ≥3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable CMS engine, Mecc Altea alternator and DEIF controller |
| 2. Advanced lean burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency of 90kW natural gas genset |
| 5. This clean energy natural gas generator set is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 90kW Natural Gas Genset | |
| Modèle | ZJ90GF4-PN |
| Prime Power | 90 kW (112.5 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 162.4 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.30 Nm³/kWh |
| Masse | 1,200 kgs |
| Overall Size (L × W × H) | 2,240 × 1,000 × 1,400 millimètre |
| Engine | |
| Marque | CMS |
| Modèle | 6BT |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 5.9 L |
| Compression Ratio | 10.5 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 38% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECP34-1L/4 |
| Excitation Type | Brushless with AVR |
| ConnectionType | 3-Phase, 4-Line |
| Conversion Efficiency | 92.4% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
120kW Natural Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥ 76% |
| 2. Gas Pressure ≥ 3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller |
| 2. This 120kW natural gas generator set enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency |
| 5. This gas fueled generator is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 120kW Natural Gas Genset | |
| Modèle | ZJ120GF4-PN |
| Prime Power | 120 kW (150 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 216.5 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.29 Nm³/kWh |
| Masse | 1,450 kgs |
| Overall Size (L × W × H) | 2,700 × 1,120 × 1,600 millimètre |
| Engine | |
| Marque | CNHTC (Steyr & AVL Tech.) |
| Modèle | WT615 |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 9.726L |
| Compression Ratio | 10.5 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500rpm |
| Conversion Efficiency | 39% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECP34-2L/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 92.8% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
140kW Natural Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥ 76% |
| 2. Gas Pressure ≥3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller |
| 2. Our 140kW natural gas genset enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency |
| 5. This green power gas generator is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 140kW Natural Gas Genset | |
| Modèle | ZJ140GF4-PN |
| Prime Power | 140 kW (175 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 252.6 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.29Nm³/kWh |
| Masse | 1,750 kgs |
| Overall Size (L × W × H) | 2,800 × 1,150 × 1,680 millimètre |
| Engine | |
| Marque | CNHTC (Steyr & AVL Tech.) |
| Modèle | WT615 |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 9.726 L |
| Compression Ratio | 10.5 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 39% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO38-1SN/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 93% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
160kW Natural Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥76% |
| 2. Gas Pressure ≥3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller |
| 2. This 160kW natural gas genset enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency |
| 5. Gas fueled gensets are adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes of this backup power generator |
spécification & Configuration
| 160kW Natural Gas Genset | |
| Modèle | ZJ160GF4-PN |
| Prime Power | 160 kW (200 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 288.6 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.29 Nm³/kWh |
| Masse | 1,850 kgs |
| Overall Size (L × W × H) | 2,900 × 1,150 × 1,680 millimètre |
| Engine | |
| Marque | CNHTC (Steyr & AVL Tech.) |
| Modèle | WT615 |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 9.726 L |
| Compression Ratio | 10.5 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 39% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO38-2SN/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 93.1% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
200kW Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥76% |
| 2. Gas Pressure ≥3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller |
| 2. This 200kW gas genset enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency of this home generator |
| 5. This residential backup power generator is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 200kW Gas Genset | |
| Modèle | ZJ200GF4-PN |
| Prime Power | 200 kW (250 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 360.8 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.29 Nm³/kWh |
| Masse | 1,950 kgs |
| Overall Size (L × W × H) | 2,900 × 1,150 × 1,720 millimètre |
| Engine | |
| Marque | CNHTC (Steyr & AVL Tech.) |
| Modèle | T12 |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 11.596 L |
| Compression Ratio | 11 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 40% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO38-1LN/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 93.4% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
250kW Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥ 76% |
| 2. Gas Pressure ≥3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller |
| 2. This 250kW gas generator enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency of this home standby generator |
| 5. This backup generator is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 250kW Gas Genset | |
| Modèle | ZJ250GF4-PN |
| Prime Power | 250 kW (312.5 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 451 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.29 Nm³/kWh |
| Masse | 1,950 kgs |
| Overall Size (L × W × H) | 2,950 × 1,150 × 1,720 millimètre |
| Engine | |
| Marque | CNHTC (Steyr & AVL Tech.) |
| Modèle | T12 |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 11.596 L |
| Compression Ratio | 11 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 40% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO38-2LN/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 93.4% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
300kW Gas Powered Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥ 76% |
| 2. Gas Pressure ≥3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable Deutz engine, Mecc Altea alternator and DEIF controller |
| 2. This 300kW gas powered genset enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency |
| 5. This natural gas backup generator is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 300kW Gas Powered Genset | |
| Modèle | ZJ300GF4-PN |
| Prime Power | 300 kW (375 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 541.2 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.29 Nm³/kWh |
| Masse | 3,350 kgs |
| Overall Size (L × W × H) | 3,000 × 1,400 × 1,800 millimètre |
| Engine | |
| Marque | Deutz |
| Modèle | BF8M1015 |
| Taper | 8-cylinder, 4-stroke, turbocharged |
| Displacement | 15.876 L |
| Compression Ratio | 11.5 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 40% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO40-1S/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 93.9% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
500kW Natural Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥ 76% |
| 2. Gas Pressure ≥ 3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller |
| 2. Our 500kW gas fueled generator set enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency of home backup power generator |
| 5. This standby generator is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| Modèle | ZJ500GFJ4-2PN |
| Prime Power | 500 kW (625 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 902.1 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.28 Nm³/kWh |
| Masse | 8,500 kgs |
| Overall Size (L × W × H) | 6,800 × 3,000 × 2,400 millimètre |
| Engine | |
| Marque | CNHTC (Steyr & AVL Tech.) |
| Modèle | T12 × 2 |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 11.596L × 2 |
| Compression Ratio | 11 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 40% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO38-2LN/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 93.4% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
750kW Natural Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥76% |
| 2. Gas Pressure ≥ 3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. This 750kW natural gas generator set is equipped with reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller |
| 2. This industrial gas genset enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency |
| 5. This 750kW natural gas generator set is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 750kW Natural Gas Genset | |
| Modèle | ZJ750GFJ4-3PN |
| Prime Power | 750 kW (937.5 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 1,353 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.28 Nm³/kWh |
| Operating Weight | 12,500 kgs |
| Overall Size (L × W × H) | 7,600 × 3,000 × 2,400 millimètre |
| Engine | |
| Marque | CNHTC (Steyr & AVL Tech.) |
| Modèle | T12 × 3 |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 11.596L × 3 |
| Compression Ratio | 11 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 40% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO38-2LN/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 93.4% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |
1000kW Natural Gas Genset
Recommended Operation Conditions
| 1. CH4 Content of Gas ≥76% |
| 2. Gas Pressure ≥ 3 kPa |
| 3. Calorific Value ≥ 32 MJ/m³ |
| 4. H2S Content of Gas ≤ 20 mg/m³ |
| 5. Total Sulphur Content of Gas ≤ 460 mg/m³ |
| 6. Altitude ≤ 4,000 m |
| 7. -25ºC ≤ Ambient Temperature ≤ +50ºC |
Advantages & Features
| 1. Our 1000kW natural gas generator set is equipped with reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller |
| 2. This clean energy natural gas genset enjoys advanced lean-burn technology |
| 3. Prompt dynamic response similar to diesel genset |
| 4. Excellent power generation efficiency |
| 5. This 1000kW natural gas generator set is adaptable for a wide range of gas pressure |
| 6. Humanized manual, semi-auto and full-auto operation modes |
spécification & Configuration
| 1000kW Natural Gas Genset | |
| Modèle | ZJ1000GFJ4-4PN |
| Prime Power | 1,000 kW (1,250 kVA) |
| Tension nominale | 230/400 V |
| Courant nominal | 1,804.3 UN |
| Fréquence nominale | 50 or 60 Hz |
| Power Factor | 0.8 |
| Gas Consumption | 0.26 Nm³/kWh |
| Masse | 18,500 kgs |
| Overall Size (L × W × H) | 9,000 × 3,000 × 2,400 millimètre |
| Engine | |
| Marque | CNHTC (Steyr & AVL Tech.) |
| Modèle | T12 × 4 |
| Taper | 6-cylinder, 4-stroke, turbocharged |
| Displacement | 11.596 L × 4 |
| Compression Ratio | 11 |
| Ignition | Electric control, independent ignition |
| Fuel Control | Lean-burn, closed-loop control |
| Speed Control | Electric control |
| Rated Speed | 1500 rpm |
| Conversion Efficiency | 40% |
| Alternator | |
| Marque | Mecc Altea |
| Modèle | ECO38-3LN/4 |
| Type of Excitation System | Brushless with AVR |
| Connection Type | 3-Phase, 4-Line |
| Conversion Efficiency | 93.4% |
| Manette | |
| Marque | DEIF |
| Modèle | AGC222 |
| Taper | Manual control, semi-auto control or full-auto control |
| Others | |
| Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included. | |
| Soundproof equipment, engine oil, coolant and output cable are not included. | |