La description
E2 Series
The E2 is an ultra-compact PA and monitor system in one that comes in at just under 11 kg to supply 500 watts peak performance and a maximum sound pressure of 120 dB. It also boasts extensive sound dispersion and high feedback resistance. The E2 is easy to carry and fits on any car seat.
The bass reflex cabinet of the 8″ subwoofer base also houses the system’s class-D amplifier unit with protection circuits against overcurrent, overheating, short-circuiting, and a 4-channel mixer. Thanks to built-in Bluetooth technology, a wide variety of sound sources can be connected to the E2, including playback devices and instruments, such as keyboards or guitars. Separate level controllers, and a high-shelf filter for adjusting treble and bass to room acoustics ensure perfectly tuned performances.
| Model No. | E2-B |
| Taper | Portable battery-powered column PA system |
| Subwoofer | 1 * 8″ bass reflex, 1.5″ voice coil |
| Vertical array system | 2 * 2.75″, neodymium magnet, 1″ voice coil |
| Frequency Response (-6dB) | 58 Hz – 20 kHz |
| Max. SPL (1m, free space) | 120 dB |
| Impedance | 4 Ohms |
| Dispersion (H x V) | 120° x 20° |
| Amplification | Class D |
| Power Output (RMS) | 30W (Sat) + 120W (Sub) |
| Protection | Short circuit overheating, over-current |
| Controls |
Power On / Off switch, guitar level, Line/Mic level and switch, satellite level, subwoofer level, BluetoothOn / Off switch, TWS switch, reset switch |
| Indicators | Pouvoir, signal, limit, Bluetooth, réinitialiser, battery |
| Audio Input / Output | 1 * 6.3mm guitar input, 2 * XLR Line/Mic input , 1 * XLR Line out, 4-pin-quick-insert input and output |
| Source de courant | 90~250V 50/60HZ |
| Enclosure | PP & ABS |
| Grille | 1.0mm thickness metal grille without acoustic fabric |
| Entretoise | Empty spacer module without woofers |
| La batterie | Lithium–ion battery 3600mAh 12pcs * 18650 |
| Package Measure | 48*46*55 CM |
