Descripción
Descripción:
The OPGW/ADSS fittings are used for fixing OPGW/ADSS cable on pole/towers of aerial electric lines or in transforming stations…
Ventajas:
1.20 years experiences
2.YO ASI 9001: 2008
3.Faster delivery
4.Good Quality
5.Professional technical support on installation
| Product Model | Cable Diameter (milímetro) | Armor Rods (milímetro) | Anchor Shackle |
| AQXD 200-12.0 | 9.0-12.0 | 800 | U-7 |
| AQXD 200-14.0 | 12.1-14.0 | 1000 | U-7 |
| AQXD 200-16.0 | 14.1-16.0 | 1100 | U-7 |
The OPGW/ADSS fittings include:
(1) Preformed retention sets
(2) Preformed suspension sets
(3) Splice closure
(4) Spiral vibration damper
(5) Stockbridge vibration damper
etc..
>Preformed Retention Sets:
The preformed retention sets have simple and stable structure, easy to install and low price.
Main data sheet:
1.Material: Aluminum clad steel
2.Suitable cable span: 100m to 1000m
3.Breacking strength: 5KN to 150KN
Solicitud:
- Terminal pole tower, tension pole/tower,
- Pole/tower with corner angles greater than 15°and RTS no more than 10kN
- Suitable for city ADSS cable installation.
Preformed Suspension Sets:
The preformed suspension set for ADSS cable is specifically designed for the installation of cables on the pole/tower. The unilateral angle of the suspension will be 15º–18º.This suspension is recommended as being superior to armor-clamp combinations, for protecting conductors from bending stress, compression stress and abrasion. The grip strength of the clamp is bigger than 10%-20% of the rated tensile strength.
Main data sheet:
1. Material: aluminum clad steel
2. Suitable cable span: 100m to 1000m
3. Breacking strength: 5KN to 150KN
Solicitud:
1. Poles/ towers with corner angle of less than or equal to 25°n straight lines.
2. The angle of single-side suspensions is between15°-18°
