Περιγραφή
1. περιγραφή προϊόντος
BMS Product feature:
About the battery BMS/PCB/PCM Function: Separate Version : separate port for charge/discharge We can customize any PCB from 1S to 35S lithium batteries with different current.
|
- Description of application effect
(Σύστημα διαχείρισης μπαταριών) BMS can extend battery life and make battery work safely.
This model can be used for solar, LED lights, Emergency lights, Digital Equipment, etc.electric scooter,e-bike,tourisr
sightseeing vehicle,electric tricycle,low speed ev,emergrncy ups,solar street light,RV&home energy storage……
sightseeing vehicle,electric tricycle,low speed ev,emergrncy ups,solar street light,RV&home energy storage……
About your products,just tell us the relative voltage/cells/current A or equipment etc,we will help to recommend the most suitable products for you.
Mode | LWS-30S170A-308 (30S) |
PCM Size | L270*W115*T13.4 mm |
battery series | 4S-30S Available |
working current | 170A Available |
Application | LED lights, Emergency lights, Digital Equipment, και τα λοιπά |
Δείγμα | available |
Wiring:
1. First connect the B- of the BMS to the total negative pole of the battery pack;
3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
1. First connect the B- of the BMS to the total negative pole of the battery pack;
2.The cable starts from the thin black one connecting B-, the second red wire connects the positive pole of the first string of batteries, and the next string is connected in turn to positive pole of the battery,B-,B1,B2……B30; then insert the cable into the BMS;
(The maximum number of strings is 4-30 strings, the example picture is 30 strings) (Please weld the wires in order and avoid pseudo solder joints.)3. Connect Charger C-/Load P- with BMS C-/P- (Use larger size wires)
4. Connect Positive Pole: Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
PCM Specifications For 96V(30S) LiFePO4 Battery Packs | |||
Μοντέλο:LWS-30S170A-308(30S) | |||
Οχι. | Test item | Criterion | |
1 | Voltage | Charging voltage | DC:109.5V CC/CV |
Balance voltage for single cell | 3.6±0.025V | ||
2 | Current | Balance current for single cell | 36±5mA |
Current consumption | ≤50μΕΝΑ | ||
Max continuous charging current | 30ΕΝΑ | ||
Max continuous Discharging current | 170ΕΝΑ | ||
3 | Over charge Protection | Over charge detection voltage for single cell | 3.75±0.025V |
Over charge detection delay time | 0.5S-1.5S | ||
Over charge release voltage for single cell | 3.55±0.05V | ||
4 | Over discharge protection | Over discharge detection voltage for single cell | 2.2±0.08V |
Over discharge detection delay time | 0.5S-1.5S | ||
Over discharge release voltage for single cell | 2.70±0.1V | ||
5 | Over current protection | Over current detection voltage | 0.1±0.025V |
Over current detection current | 400±50A | ||
Detection delay time | 50ms-200ms | ||
Release condition | Cut load,Automatic recovery | ||
6 | Short protection | Detection condition | Exterior short circuit |
Detection delay time | 100-600us | ||
Release condition | Cut load,Automatic recovery | ||
7 | Resistance | Protection circuitry(MOSFET) | ≤50mΩ |
8 | Θερμοκρασία | Operating Temperature Range | -40~+85ºC |
Storage Temperature Range | -40~+125ºC | ||
9 | Temperature protection | Charging temperature protection | 75±5ºC |
Discharging temperature protection | 75±5ºC |
3. FAQ
|