Beskrivelse
High Radiant Flux 200mW 275-285nm UVC LED
Dimension:6.8mm ×6.8mm ×1.51mm
1. Typical Optical/Electrical Characteristics (Ta=25ºC)
| Parameter | Symbol | Min. | Typ. | Maks. | Unit | Test conditions |
| Forward Voltage | VF | 24 | 26 | 30 | V | IF=400mA |
| Reverse Current | IR | — | — | 3 | uA | VR = 30V |
| Viewing Angle | 2θ1/2 | — | 120 | — | deg | IF=400mA |
| Radiant Flux | Φe |
180 | 200 | 220 | mW | IF=400mA |
| Peak Wavelength | λp | 270 | 275 | 285 | nm | IF=400mA |
2. Absolute Maximum Ratings (Ta=25ºC)
| Parameter | Symbol | Value | Unit |
| Power Dissipation | Pd | 10 | W |
| Forward Current | IF | 500 | mA |
| Reverse Voltage | VR | 10 | V |
| Operating temperature range | Topr | -40~+80 | ºC |
| Storage temperature range | Tstg | -40 ~+80 | ºC |
| Soldering Temperature | Tsld | Reflow Soldering:260o for 10 seconds | |
| LED Solder Temperature | Ts | 80 | °C |
3,Spectral Power Distribution (Ta=25ºC)
4,Current VS. Ambient Temperature
These UV LEDs is a revolutionary, energy efficient light source for sterilization & disinfection and medical application, with its advantages of lifetime and reliability. You can design freedom, and creating a new opportunities for solid state UVC light source to displace conventional UV technologies(Such as Mercury lamp).
More details of the products,send mail to get the Specification.
- Fluorescent spectroscopy
- Sensors and monitors
- Bio-analysis/detection
- Phototherapy
- Disinfection
How UV LEDs Works for disinfection?
UV disinfection is a physical method of disinfection. Although UV light can’t kill microorganisms directly, it can destroy the ability of microbial inactivation. Microorganisms exposure in ultraviolet radiation, the genetic material nucleic acid DNA and RNA absorb a lot of ultraviolet energy, then been destroyed and lost the ability to divide and copy, and finally natural death or the immune system to eliminate, and loss of human pathogenic ability.
We used new and forward-looking Encapsulation technical to accurately control the real wavelength.
Our Services/Why choose Us
1. Professional service: replied within 24 hours(at workdays).
2. Various ready moldings of lamp led are available: no need to afford extra fee for moldings.
3. We also can provide customized products, design according to your demand.
4. Reliable and stable quality: 100% testing for each piece. Automatic testing and bin code selection machine.
5. Experience: produce LED components for more than 14 flere år.
6. Advanced Equipment: ASM automatic production machines(biggest brand in LED automatic machines)
7. Concentration: We focus on LED research and development, production and sales.