Beskrivelse
Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements.
(RDS2 Automatic Transfer Switch 100AMPS 4 Poles with Built-in controller)
RDS2 Series
PC class automatic transfer switch
Adopt two in one out design, easy to wiring;
With “0” position technology, can be forced to “0” position under emergency situation to match the fire-linkage requirement; Optional multifunction Intelligent controller with Programmable high/low voltage protection, high/low frequency protection, adjustable transfer delay time, adjustable center delay time, build-in engine exerciser, fault transfer to “0” function is optional; Separate LCD display is optional, with RS485 communication function
Optional functions: Center delay, fault to “0” position, engine exerciser etc.
Frame current: 100, 160, 250, 630, 1600EN. 2000EN, 3200EN.
| Type | B type controller | E type controller | G type controller | ||
| Motor control voltage | AC220V/50Hz | ||||
| Aux. Power | / | DC 24V | GA Type | GB Type | GC Type |
| 1, DC 12V 2, DC 24V |
Passive Output | AC 220V | |||
| Voltage Measuring Range | AC 40 to 300V | ||||
| Power Loss | less or equal 10W | ||||
| Working Position | (Normal power ON, Reserve power ON, OFF) Three working position | Three (I power ON, II power ON, I/II power OFF) | |||
| Operating Mode | Auto, Manual | Auto, Manual, Remote | Auto, Manual | ||
| Display Mode | LED Indicator | LCD Display | LED Indicator | ||
| Runing Status LED Indicators | I/II POWER; I/II ON | ||||
| Voltage Display | No | Ja | No | ||
| Transfer Mode | Auto Transfer and Recovery | Auto Transfer auto recovery / Auto transfer no recovery | Auto Transfer and Recovery | ||
| Source Priority | Default no source priority | Settable I/II/No Priority | Default no source priority | ||
| Under voltage transfer value | NO | +/- 20% Adjustable | NO | ||
| Over voltage transfer value | NO | +/- 20% Adjustable | NO | ||
| Transfer Delay Function | NO | 0~180s Adjustable | NO | ||
| Recovery Delay Function | NO | 0~180s Adjustable | NO | ||
| Phase missing detect | Single phase (A Phase) | Three phase (EN,B,C Phase) | Single phase (A Phase) | ||
| Generator control | Ja (one set DC2A relay contact) | ||||
| Fire-linkage control | Ja (passive contact input, with one set NO passive feedback signal) | ||||
| RS485 function | NO | Ja | NO | ||
| Frequency Protection | NO | +/-20% adjust | NO | ||
| Engine Exerciser | NO | Ja | NO | ||
| ATS Features Comparing, RDS2 — Outdated type ATS | ||
| RDS2 | Outdated type ATS | |
 |
 |
|
| Certifikater | CE, RoHS | / |
| Flame-retardant Cover | Ja | No |
| Working voltage (L-N) | Wide(150VAC-300VAC) | Ordinary |
| Controller | Intelligent and settable | Simple, fixed function |
| I Power LED Indicator | Ja | No |
| II Power LED Indicator | Ja | No |
| I Power ON LED Indicator | Ja | No |
| II Power ON LED Indicator | Ja | No |
| Over/Under Voltage Protection | Ja | No |
| Over/Under Frequency Protection | Ja | No |
| Transfer Time Delay | Settable | Fixed |
| Generator Start/Stop Time Delay | Settable | No |
| Engine Exciser(weekly, monthly etc.) | Ja | No |
| Phase Immbalance Protection | Ja (custom made) | No |
| Størrelse | Compact | Larger |
| Copper Bar | 2 Input 1 Produktion | 2 Input 2 Produktion(some) |
| Operation Handle | Iron(solid) | Plastic(crispy) |
| Fuse | Ja | No |
| Outlook | Distinguished & Elegant | Common |
| Motor Brand | CNDF | Wuxi, inferior quality |
| Before Factory Testing | Auto Testing Line/Manual | Manual check |
Dlivery Terms
Sea Shipment & Express & Air express
Packaging
( Product Packaging, Produkt: RDS2)
About the Company
ATS Controller Operation Units
ATS and Controller Operation Units
Products Test Equipment
ATS Switch Test Line
(Our Test Lab)
RADIN parts are TUV, CB, CE, CCC certified, and the factory is ISO9001:2015 qualified.
FAQ:
1. What’s the warranty term?
24 Monthes.
2.How long does it take to deliver my goods?
Normally, samples can be delivered in 2 dage. Customer designed sampleswill be delivered in 3-7 dage.
3. Do you offer sample?
Ja, we offer sample order for customer to test the goods.
4. What kinds of payment terms do you accept?
We offer kinds of payment ways foe customer to chose from. T/T,L/C,Aliexpress,Western union etc.
5. What if there’s quality peoblem?
We offer replacement for the goods as soon as there is a quality problem with the goods, and the fright is on our account to cut down the customer’s loss to the lowest.
We are sure any of your questions will get our prompt reply, just leave the message!