Beskrivelse
Sine Type PM Synchronous AC SERVO MOTOR 60ST-M SERIES
Electrical Specifications:
Specification Model | 60ST-M00630 | 60ST-M01330 | 60ST-M01930 | |
Rated Power(w) | 200 | 400 | 600 | |
Rated Torque(N.m) | 0.64 | 1.27 | 1.91 | |
Max Torque(N.m) | 1.91 | 3.82 | 5.73 | |
Rated speed(r/min) | 3000 | 3000 | 3000 | |
Max speed(r/min) | 3600 | 3600 | 3600 | |
Nominel strøm(EN) | 1.27 | 2.5 | 3.73 | |
Max Current(EN) | 3.69 | 7.33 | 11.0 | |
Rotor Inertia (kg.cm²) | 0.17 | 0.30 | 0.44 | |
Vægt(kg) | 1.0 | 1.4 | 1.8 | |
Speed/Position Detector | Photoelectric Encoder: 2500p/rev | |||
Structure | Totally Enclosed Self-cooling(Protection ClassIP65) | |||
Working Voltage AC(V) | Three phases 220V-15%-+10% 50/60Hz(300V) | |||
Manner of Working | Continuous | |||
Insulation Class | F | |||
Ambient | Temperatur | 0-40°C(Not Freeze),Keep:-25-70°C(Not Freeze) | ||
Humidity | Below 80%RH(Non-condensate) Keep:below90%RH(Non-condensate) |
|||
Ambient Condition | Indendørs (not directly affected by sunshine), away from corrosive gases, flammable |
|||
Højde | Elevation below 5000m | |||
Vibration | Axial:24.5m/S² Radial:49 m /S² |
Wiring Diagram:
Motor Line
No. | 1 | 2 | 3 | 4 |
Content | Red U | Yellow V | Blue W | GND |
Encoder Line
No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
Content | A+ | EN- | B + | B- | Z+ | Z- | U+ | U- | V+ | V- | W+ | W- | VCC | GND | Shielding Line |
*Shown in the table is the representative product, It can be customized according to the requirements of users
Servo motor installation Notices:
1. When install/uninstall the coupling components to the shaft, please don’t hardly beat the shaft end to prevent the motor’s other encoder damaged;
2. Trying to make the coupling shaft’s concentricity to be best to extend the service life.