Beskrivelse
Fiber Optic Field Cleaver
Introduction:
The TC-90 fiber optic field cleaver offers quality cleavers at reasonable price.A properly maintained TC-90 cleaver is capable of leaving a mirror-like end face finish 2.0mm-20.mm from a fiber coating .
Specifikationer:
For Use With: Single.125mm O.D.Fiber
Cleaver Length: 2.0mm to 20.0 mm
Overall Dimensions : 124mm(L)*20mm(W)*40mm(H)
Vægt: 75g
Operating Temperature: -20 to 60 deg.c
Storage Temperature: -20 to 60 deg.c
Operation:
1) Strip and clean fiber
Remove primary and secondary coatings from the fiber , Compare removal of the primary coating may be using a fiber stripper.Next, Clean the fiber with alcohol and a lint-free wipe.
2)Set fiber
Press the fiber holding level down and insert the clean fiber into the fiber holding level once more to relieve torsional stress.
3)Scoring
Lightly and slowly press down on the blade box to nick the fiber , The blade must be used gently in order to provide a good cleave. Slowly release blade box -only score the fiber once.
4)Cleaving
Carefully bend the leaf spring down while continuing to hold the fiber. Bend the leaf spring just enough to separate the fiber , over bending can damage the spring .Release the fiber hold level and dispose of the fiber stub .
Vedligeholdelse:
The TC-90 cleaver is a precision tool, and it must be kept clean. If the cleaver is misused,the leaf spring or blade may not function properly. Both parts maybe re-ordered through TengChang. With proper care, the TC-90 will be able to reliably cleave thousands of fibers
