Water Cooled Water to Air Packaged Unit/ Water Loop Heat Pump/Water Source Heat Pump/Wshp/Wcp/Water Source Heat Pump Factory

اكتب: Water to Air Type Packaged Heat Pump/Water Cooled Packaged Unit/ Water Source Heat Pump/ Water Loop Heat Pump/WSHP/WCP
Capacity Range: 2.5KW to 250KW;
ضاغط: Daikin/Panasonic/Sanyo/Danfoss
Electric Parts: Schneider
المبردات: R22/ R410a / R407c/ R134a
Cooling/Heat Pump: Cooling only, Cooling & Heat Pump
Served Area: Office Builing, Shopping Mall and etc
شهادة: CE/CCC/MEPS

1. About our Water Source Heat Pump
STRUCTURE
Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to
atmospheric agents.
HERMETIC COMPRESSOR
Single phase rotary type (model. 2.5 to14 KW) and 3-phase scroll compressor (model 18 ل 74 كيلوواط), with thermal overload cut-out and
crankcase heater mounted on rubber vibration isolators.
CENTRIFUGAL FAN
Forward centrifugal fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, three speeds
CONDENSER
High efficiency tube in tube heat exchanger, factory insulated with flexible close cell material.
EVAPORATOR
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.
DESUPERHEATER
High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material. (optional)
REFRIGERANT CIRCUIT
Copper tube connection with charge valve, منقي, sight
زجاج, gas-liquid separator, thermostatic expansion valve,
low pressure switch, high pressure switch
The heat pump unit is completed also with 4-way valve,
liquid receiver and one way valve.
HYDRONIC CIRCUIT
Built with air vent valve, water drain connection, and female-threaded hydraulic connectors.
ELECTRIC PANEL
Compressor protection; Control circuit protection; Phase sequence relay (only for 3-phase power supplied;
Programmable microprocessor controller (MODBUS included for BMS connection)
Detailed Specifications:

COOLING CAPACITY UNDER CONDITION: WATER 30deg in /35 deg out; air DB 27deg/ WB 19 deg
HEATING CAPACITY UNDER CONDITION :WATER 20deg in ;air DB 20deg/WB 15 deg
2.About Factory:

Facoty with 260,000 Square Meters and 15 year’s manufacturing and exporting experience of whole range’s HVAC products

Shandong Tianqu Cooling Technology Co., Ltd, was originated from LARK Central Air Conditioning, which is founded in 2007 and one of the major manufacturer for central air conditioning products.

We are professional on R&د, إنتاج, project design and installation, after sales service. Totally covering 260,000 متر مربع, investing 360 million RMB, owning high qualified machines from Germany and Japan to ensure high level products.

OUR ADVANTAGE:
1. 15 YEARS’ EXPERIENCE IN MANUFACTURING AND DESIGNING FULL RANGES’ HVAC PRODUCTS;
2. Exported to more than 60 COUNTRIES, WITH RELIABLE QUALITY
3. OEM/ODM and customized products available;
4. High Quality Products with Reasonable price;
5. Full Range’s HVAC products’ Manfufacturer, you one stop’s HVAC solutions provider

We take care of every section of process and service for clients. Qualified products are produced according to ISO 9001:2000 and ISO14001:2004, ,we flexibly provides wide range of Packaged rooftop Units, High Pressure Duct type, Condensing Units, Mini Chillers, Modular Chillers, Air Cooled Screw Chillers, Water Cooled Screw Chillers, Water Source Heat Pump, Water Cooled Packaged Units, Fan Coils, AHUs, HRVs and etc. Our market is based in China, and we have sold to Europe, America, Africa, Middle East, أستراليا, Asia and etc. Our products have been sold to over 60 countries.

Besides previously Lark brand, now we also have one new brand-Top Air.

Top Air, it is your top choice on HVAC products!

3. التعليمات
س 1: Are you a manufacturer?
أ 1: نعم, we have more than 15 years in manufacturing and exporting HVAC products. Our factory located in Zaozhuang city, Shandong Province, الصين; Welcome to visit us at any time convenient for you.

س 2: Could you help us to choose the model for our project?
A2: نعم, we have experienced engineer to check the details و choose the correct model for you. Based on the following parameters:
أpplication industry;
Packaed type: air cooled or water cooled;
قدرة التبريد;
If you don’t know, you can offer the flow rate to your machine, temperature in and temperature out from your using part;
Ambient temperature;
Refrigerant type, R22, R407c, R410a or R134a;
مزود الطاقة: Voltage/Phase/Frequency;
Any other special requirements.

Q3: How to ensure your product with good quality?
A3: All our products with CE certificate and our company Strictly comply with ISO9001 quality management system. We adopt the worldwide famous brand accessories, such as DANFOSS, COPELAND, PANASONIC compressors, Schneider electrical components, DANFOSS/EMERSON refrigeration components. Each unit will be fully tested before leaving factory.

س 4: What’s the warranty and lead time?
A4: 1 year warranty for the whole unit; مهلة: within 30 days after deposit

س 5: What’s the payment mean?
A5: For new client, 30% TT before production as deposit, rest balance before shipment is standard payment mean. For long term’s business, LC at sight also available;