Solar System 3p Power Surge Protector

نموذج رقم.
CLBZSPD

Shape
Square

مادة
UL 94V0 Thermoplactic

شهادة
CCC

ماركة
C.Lbe

اللون
أحمر,أبيض

Protection Level
IP20

Ambient Temperature
-40ºC-+80ºC

Outline Size
36*66*90مم,54*66*90مم

حزمة النقل
Carton

تخصيص
54X66X90

علامة تجارية
ج. LBE

أصل
Zhejiang Yueqing

رمز النظام المنسق
853630000

السعة الإنتاجية
100000/Week

وصف

Solar System 3p Power Surge Protector
Solar System 3p Power Surge ProtectorSolar System 3p Power Surge ProtectorSolar System 3p Power Surge Protector
cope of application

CLBZSPD series photovoltaic special DC surge protection device(SPD) used in lightning protection of solar photovoltaic power generation system or other Dc power green means normal,red to represent the fault ,must be replaced and legible;optional remote communication interface,the realization of remote monitoring :high working voltage ,high safety and stability
The product can be pluggable modular design ,standard guide installation ,selection of high-quality photovoltaic professional professional lightning protection devices,stable performance ,built-in hot meit ,flow in dual protection circuit,visualization window,normal green,red fault ,large flow capacity,low residual voltage ,fast response(nanosecond),with remote monitoring function,convenient remote monitoring (optional).
Product Introduction
This DC surge protection device is protect against DC power line system and other equipment from over voltage and instantaneous over voltage damage.Widely used in photovoltanic combiner box,power inverter,DC distribution cabinet etc.It has advantages of large discharge current,fast respond time,low residual voltage.
سمات
1.Plug-in type surge protective device
2.Visible window,green means normal,red means fault
3.Double protection of fusing and over-current
4.Remote signal interface that realiza remote control
Electrical Parameters

نموذج CLBZSPD-40 CLBDSPD-40
Maximum Continuous Operating Voltage Uc 500V DC 800V DC 1000V DC 1200V DC 1500V DC 1800V DC
Nominal Discharge Current (8/20µs) 20KA
الحد الأقصى لتيار التفريغ(8/20µs) 40KA
Poles 2P 3P 3P 3P 3P 3P
Voltage Protection Level Up ≤1.8KV ≤2.9KV ≤3.6KV 3.8KV 4.2KV 6.8KV
Response Time tA ≤25ns ≤25ns ≤25ns ≤25ns ≤25ns ≤25ns
Indication Method Visible window,Green=normal, Red=fault
Min. sectional area of incoming wire L/N 4mm2 4mm2 4mm2 4mm2 4mm2 4mm2
Min. sectional area of incoming ground wire PE 6mm2 6mm2 6mm2 6mm2 6mm2 6mm2
Method of Installation 35mm Din Rail
Material of Shell PBT
Protection Level of Outer Shell IP20
Working Temprature -25 -+70درجة مئوية

تثبيت
1.Do power off when when connect surge protection device to system
2.Ground wire should be as short,straight and thick as possible to reduce the influence of distributed in ductance on lightning discharge.
3.No need special maintenance.when surge protector happens fault,equipment connected to remote sign all will send alarm,then power off and change new SPD mould is fine
Dimension and wiring Diagram
Solar System 3p Power Surge Protector

Outline Dimension
Solar System 3p Power Surge Protector
تطبيق
Solar System 3p Power Surge Protector

Solar System 3p Power Surge Protector
منتجات ذات صله
Solar System 3p Power Surge Protector

Our company
Solar System 3p Power Surge Protector

Solar System 3p Power Surge Protector