1000Mbps RJ45 Gigabit Poe Outdoor Lightning Protector

نموذج رقم.
SNH-RJ45/POE-OD

Working Voltage Un
48الخامس

Nominal Discharge Current(8/20&Ms)in
5ka

Protection Level (8/20µs)up
100الخامس

Protection Line
1-8

البعد
50(ح)×100(دبليو)×120(ل)مم

IP Level
IP65

Working Conditions
درجة حرارة: -40 ل 85 درجة

Standards Compliance
Ce, FC, بنفايات,ISO9001

Adapt Transmission Rate
1000Mbps

فقدان الإدراج
≤0.5dB

حزمة النقل
Carton or Wooden Cases

تخصيص
هذه, لجنة الاتصالات الفيدرالية, ISO9001, بنفايات, China National Type Test

علامة تجارية
opplei

أصل
الصين

رمز النظام المنسق
8535300000

السعة الإنتاجية
500, 000PCS/Year

وصف

RJ45 1000Mbps single channel Outdoor Gigabit Power over Ethernet Surge protector

نموذج: SNH-RJ45/POE-OD

1000Mbps RJ45 Gigabit Poe Outdoor Lightning Protector

1000Mbps RJ45 Gigabit Poe Outdoor Lightning Protector

APPLICATIONS:
Designed for Ethernet device in the outside not to be spoiled by lightning over-voltage, induced over-voltage and static discharge.
CAT6, CAT5e and CAT5 compatible
802.3af
10/100/1000 Base-T Gigabit Ethernet protection
LAN, FDDI,CDDI, ATM,WLAN
PDH, SDH, SPDH
Industrial control
POE IP cameras outdoor
FEATURES:
Multi. Protection circuits, Gas-Tube + TVS technology
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability

المقياس التقني:
نموذج SNH-RJ45/POE-OD
Electrical Parameter(Network & قوة)
Nominal operating voltage Un 48الخامس
الأعلى. continuous operating voltage Uc 60الخامس
Nominal discharge current(8/20µs)In 3kA
الأعلى. تيار التفريغ (8/20µs)Imax 5kA
Limiting voltage Up
Line-line (@6kV, 10/700µs) 150الخامس
Line-line (@3kA, 8/20µs) 150الخامس
Adapt transmission rate 1000Mbps
Insertion loss ≤0.5dB
Protection line 1-8
Response time 1ns
Load current 250أماه
تطبيق Cat. 6 one channel
Mechanical characteristics
البعد 28(ح)×87(دبليو)×100(ل)مم
Weight per unit 350ز
Protection grade IP65
Working conditions درجة حرارة: -40 ل 85درجة مئوية,
Relative humidity: ≤95%
Standards compliance هذه, لجنة الاتصالات الفيدرالية, بنفايات, ISO9001

INSTALLATION AND MAINTENANCE
أ) The SPD should be connected in series between the protected device and the signal/power transmission channel.
b) The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
ج) Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
d)No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.

1000Mbps RJ45 Gigabit Poe Outdoor Lightning Protector
1000Mbps RJ45 Gigabit Poe Outdoor Lightning Protector

1000Mbps RJ45 Gigabit Poe Outdoor Lightning Protector