Description
Brief introduction
DIN rail industrial PLC Ethernet bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports HomePlug protocol and the actual bandwidth up to 550Mbps. The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..
1.1 Highlight
1.1.1 Technical parameters
Support HomePlug/HomePlugAV2.
Industrial DIN rail style installation
Actual bandwidth up to550Mbps
The maximum transfer distance up to 1000 meters
Self-adapt the rate
One Domain Master can manage 127pcs End Point.
1.1.2 Manageability
Support Remote Firmware update(TR069)
802.3D Ethernet Bridge.
802.1Q VLAN.
Quality of Service(QoS) .
IGMO(IPv4)Snooping&MLD(IPv6)Snooping
1.1.3Operating environment
Working temperature: -40ºC-85ºC.
Operating humidity: 10%-85% no condense
Storage humidity:5%-90% no condense
1.1.4 Design standards
IEC 60529
IEC 50022
IEC 60068-2-6
MIL-STD-810G
Specification
|
Model |
WD-1201M-DIN(T/T4/V3) |
WD-1201M-DIN(S) |
WD-1201M-DIN(D) |
|
Interface |
1*LAN 10/100/1000Base-TX self adaption RJ45,1* power interface MDI/MDX support |
1*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface MDI/MDX support |
1*LAN 10/100/1000Base-TX self adaption RJ45,1* power interface MDI/MDX support |
|
LED display light |
Ethernet, PLC link ,power |
||
|
Transfer band |
2-68MHz |
||
|
Protocol(PHY) |
IEEE802.3,IEEE802.3x, IEEE802.3u Homeplug AV2 |
||
|
Security |
128-AES |
||
|
Transfer rate(PHY) |
1200Mbps |
||
|
Modulation |
OFDM |
||
|
Manageability |
Remote Firmware update,support TR-069(optional) |
||
|
802.1D Ethernet Bridge |
|||
|
802.1Q VLAN |
|||
|
Quality of Service(QoS) |
|||
|
IGMO(IPv4)Snooping&MLD(IPv6)Snooping |
|||
|
Working voltage |
AC 90V-520V |
DC 90V-600V |
|
|
Operating temperature |
-40ºC-80ºC |
||
|
Size |
67*160*123 (mm)(L×W×H) |
||
|
Weight |
0.35kg |
0.65kg |
|
|
Operating environment |
Operating humidity:10%-85% (no condense) |
||
|
Storage humidity: 5%-90%(no condense) |
|||
|
Certification |
FCC,CE class B,WEEE,RoHS |
||
1.2 Features
Packet loss:≤0.1%(100M,load 70%)
Support 7*24 hours all weather operation
Hardware watch dog function
PING≤2MS
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
1.7 System topology
WD-1201M-DIN(T)
WD-1201M-DIN(T4)
WD-1201M-DIN(V3)
WD-1201M-DIN(S)
WD-1201M-DIN(D)
