Description
1. Line array speaker, PRO audio, PA system
2. 2×10″+1×3″ Neodymium
3. High copy D&B audio
4. Concert, Band, stadium, Church, theate
Q1:
1: The Q1 is a passive 2-way loudspeaker housing two 10″ LF drivers positioned in a dipolar arrangement and a 3” HF compression driver fitted to a toroidal wave shaping device.
2:The 75° constant directivity horizontal dispersion pattern is maintained down to 400 Hz, while the vertical HF dispersion of 15° allows the Q1 to be used to construct vertical columns that produce a curved coherent wave front.
3:The mechanical and acoustical design of the cabinet enables vertical splay angles to be set between 0° and 14°. Q1 cabinets can therefore be used in vertical configurations starting from two cabinets with a 15° to 30° dispersion, up to twenty cabinets with a fully user and venue defined vertical profile.
Q-SUB :
1: The Q-SUB is an passive bass-reflex loudspeaker fitted with a high excursion 18″ driver.
2 : The Q -SUB is mechanically compatible with the Q1 and Q7; ten sockets in the front grill and side panels for Q-Series rigging components permit use in various combinations, either flown or ground stacked.
3 :The Q -SUB cabinet is constructed from plywood with an impact resistant paint finish, a pair of handles, four heavy duty wheels and an M20 threaded flange in the top panel to accept a loudspeaker stand.
| Q1 Dual 10″ Line Array System(Neodymium Components) | |
| Frequency response (-3dB) | 60Hz-19KHz |
| Components | LF: 2x10in, Neodymium 1x3inch, Neodymium |
| Nominal Impedance | 8ohms |
| System sensitivity ([email protected]) | 106dB SPL |
| Maximum SPL | 139dB |
| Power handling | 800W |
| Peak power | 1600W |
| HxV | 75° x15° |
| Dimensions (W x D x H) | 583x310x425 mm |
| Connectors | 2xSpeakon| connectors (NL 4) |
| Enclosure material | 15mm plywood |
| Finish | Textured black paint |
| Grille | Black perforated steel |
| NG(Kg) | 23kg |
| Q-sub reflected low frequency | |
| Frequency response (-3dB) | 40Hz-200Hz |
| Components | 1×18″ woofer(Neodymium) |
| System sensitivity ([email protected]) | 106dB SPL |
| Maximum SPL | 133dB |
| Power handling | 800W |
| Peak power | 1600W |
| Nominal Impedance | 8ohms |
| Connectors | 2xSpeakon connectors (NL 4) |
| Enclosure | 15mm plywood, compact reflected low frequency |
| Finish | Textured black paint |
| Grille | Black perforated steel |
| Dimensions (W x D x H) | 583x486x668 mm |
| NG(Kg) | 34kg |
